Sure, I can click the "write" button in the pickit 2 programmer but I'd really like to be able to actually comprhend the stuff in the asm file and understand how the pic works. I'm trying to go through the pickit tutorials but they seem to be geared towards people who have experience with microcontrollers. Can someone suggest a book or some other media that can get me started? Amazon has these; but there are too many to choose from.
Mike Predko's book is a popular one I believe:
http://www.amazon.com/Programming-Customizing-PIC-Microcontroller-Electronics/dp/0071472878/ref=sr_1_24?s=books&ie=UTF8&qid=1293961378&sr=1-24
I'd maybe ask Phil Short for a suggestion. PM him.
Right now I don't have any suggestions. My knowledge about the micro-controllers is based on hanging out at Borders a while back and reading the books there (which would be quite dated by now) and reading datasheets on-line.
Edit - I'd go with the Predko book that David lists above. It is a good starting place, although it will only take you part of the way.
Are you sure you want to start with ASM? While ASM has only a handful of commands it can be a challenge writing code when you get beyond the basics. I've found that writing with ASM is an art and requires a lot of patience.
Have you considered starting with a higher level language (C or BASIC)? The Predko book covers both. Personally I started with PicBASIC up until recently when I switched to the Parallax SX then to the Propeller (which I love).
