Renard Plus RGB Str...
 
Notifications
Clear all

[Closed] Renard Plus RGB Strip Controller

96 Posts
31 Users
0 Reactions
32.3 K Views
Posts: 392
(@plasmata)
Reputable Member
Joined: 17 years ago
N7XG wrote:I am waiting on quotes before I get the boards on order. early next week I will have a draft of the assembly manual on our website which also includes the latest BOM and other useful information.
.

For the manual can you also include the suggested enclosure(s) and down the road add pictures of the board installed in one along with an external power supply? I looked at some of the other manuals and didn't see the suggested enclosure mentioned at all. BTW, I am definitely interested in a couple of the 24 channel boards now and a couple more down the line when funding gets approved.


N7XG
Posts: 480
 N7XG
Guest
(@n7xg)
Member
Joined: 19 years ago

Thanks for the comments about photos. Once we have the boards and get one built we will have photos.

Per your suggestion I will add a section in the manual for mounting in an enclosure. Thanks.


Posts: 392
(@plasmata)
Reputable Member
Joined: 17 years ago

Any progress on this?


N7XG
Posts: 480
 N7XG
Guest
(@n7xg)
Member
Joined: 19 years ago

Just posted the draft of the assemble manual on our website: http://www.renard-plus.com/files/Renard_Plus_TR16_v1.00.pdf


dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

A very nice manual, Dean. All of the Renard-plus system has obviously been quite carefully crafted. Well done -- to everyone involved!


Posts: 392
(@plasmata)
Reputable Member
Joined: 17 years ago

Talk about quick response! Thanks Dean.

Edit

Oops, actually I was referring to the 24 channel strip controller. You guys are juggling too many new boards. 😉 Good job on the TR16 manual though.


Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
plasmata wrote:Talk about quick response! Thanks Dean.

Edit

Oops, actually I was referring to the 24 channel strip controller. You guys are juggling too many new boards. 😉 Good job on the TR16 manual though.

They were sent out just about a couple of weeks ago to the PCB manufacturer.


Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
Mactayl wrote:They were sent out just about a couple of weeks ago to the PCB manufacturer.

Just a bit of an update,,, the Strip Controller and RGB DC SSR boards came in last week and will be built and tested soon.......

Mac


DaveJZ
Posts: 974
(@davejz)
Noble Member
Joined: 16 years ago

WooHoo.....


Greg in Canby
Posts: 854
(@greg-in-canby)
Prominent Member
Joined: 19 years ago

N7XG's picture is gone and he is listed as a banned user - whaaaaaat?

I just spoke with N7XG (Dean) and he was apparently banned FOR LIFE from DIYC.com this morning. I asked him which rule he broke that would have caused this and he was not sure.

So I asked him about warnings http://doityourselfchristmas.com/for...9-Terms-of-Use -

"Warnings - DIYC operates a three strike policy. Users will be warned a maximum of three times for any and all offenses in a six month period. If the need arises for a fourth warning a temporary ban will be put in place of between 1 to 7 days.
Arguing with team members after having received a warning will lead to an immediate additional warning. Should this exceed three strikes a temporary ban will be put in place as above." - he told me he got no warnings.

So under the rules - Banning - "Permanent bans are a last resort and thought is given before implementing them." - Last resort ?!? . . . those in power seem to have skipped some steps?

That said the top of the rule document has this text:

"FAILURE TO READ THE RULES IS NO EXCUSE FOR BREAKING THEM! PLEASE READ AND UNDERSTAND THE RULES BEFORE POSTING!
THE ADMINISTRATORS AND MODERATORS OF http://WWW.DOITYOURSELFCHRISTMAS.COM RESERVE THE RIGHT TO MOVE, REMOVE, EDIT, CLOSE POSTS OR BAN MEMBERS (HAVE POSTING PRIVILEGES REVOKED) WHO BREACH THESE RULES OR TERMS OF USE AT OUR SOLE DISCRETION, AND WITH OR WITHOUT PRIOR WARNING OR EXPLANATION. - so they are well within their rights to do so.

There was a recent disagreement with WIKI material that I heard a little about but I was told content was changed and apologies offered. But further in the rules:

"PUBLIC DOMAIN You acknowledge that any content or material that you post or distribute on the Forum becomes public information and not confidential. As such, this information or material may be freely used, copied and distributed, in any form, by anyone without your permission." - take that for what it's worth - I suppose.

He does have an email in, well see what comes of that.

So for now, apparently, he is gone.

Greg

P.S. All references to DIYC.com rules were copied and pasted from the text found at the link. In some instances, I had to add bold efx. If errors were made with the addition of quotation marks, I'm sorry. For specific questions, please go to the source document. This was accomplished by 1445 PDT. I have not found different rules for the WIKI, if there are, please post a link.

Edit: he is


Page 9 / 10
Share: