Renard Pixel String...
 
Notifications
Clear all

Renard Pixel String Controller

258 Posts
50 Users
0 Reactions
121.6 K Views
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago
Xenia wrote:Any chance of making 12v an option since many of the WS2811's also come in 12V.
Strother85 wrote:I'm very interested. I would have to hold out for the possibility of a 12v version as well since the 2811's I ordered are 12v.

OK, I'll do it.


Reply
Posts: 1249
(@jstjohnz)
Noble Member
Joined: 17 years ago

Not sure if the hardware you're using will support this, but I saw a very clever idea in another thread. Since you're using the 4-pin pixel connector, if you wire the clock pin and turn it on at the midpoint of each bit cell and off at the end of each bit cell, then the board would drive either 2811/1804 pixels or 2801 pixels with no configuration change.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago

Useful tip, thanks. I can route one of the PWM outputs to that connector pin.


Reply
Posts: 838
(@strother85)
Prominent Member
Joined: 15 years ago
P. Short wrote:OK, I'll do it.

Wow, I didn't expect a yes that quickly! I appreciate it, if I can hold off on learning a new sequencing system and hold off on having to learn networking until at least next year, I will have much more time to complete arches, mini trees, etc. that I plan to add this year. Sign me up for 2+ of these!


Reply
crazy_carpenter
Posts: 369
(@crazy-carpenter)
Reputable Member
Joined: 15 years ago

I would be interested too. Still being a rookie around here, I went down the Renard/Vixen path straight off the bat. I would love to dabble with pixels but frankly, I have too much money invested in my Renard system now to change horses in mid-stream. But yeah, if it can plug into my existing system, I'm all for it.


Reply
Page 3 / 52
Share: