As for USB-DMX adapters, I'd originally tried using my Enttex OpenDMX USB, but the Pi has major issues with it. Some were able to get it working, but most, like me, experienced hard lock-ups of the Pi when trying to send it data. Even using a powered USB hug. I ordered a DMXKing USB Micro and had much better luck with that. It's fully compatible with the Enttec USB DMX Pro, at about 1/3 the cost.
Theturtle32 wrote:As for USB-DMX adapters, I'd originally tried using my Enttex OpenDMX USB, but the Pi has major issues with it. Some were able to get it working, but most, like me, experienced hard lock-ups of the Pi when trying to send it data. Even using a powered USB hug. I ordered a DMXKing USB Micro and had much better luck with that. It's fully compatible with the Enttec USB DMX Pro, at about 1/3 the cost.
Avoid the Open on *any* system, they are such a dog. As you rightly say, there are plenty of other options out there!
Barnabybear wrote:The PIs SPI clock runs at 250MHz and can be devided by mulitipples of 2, 125, 64, 32, 16, 8, 4, 2, 1MHz etc. Which will be fast enough for what we need and anything above 16MHz is very optermistic for DIY build.
I was curious how the SPI engine works. Does it have a DMA controller? I only wonder because I worry about performance issues due to linux multitasking.
I imagined the video engine output would be a set and go item.
It really comes down to update rate in the end and what you can attain in the end product.
Good luck, can't wait to see some video.
Tony M.
A Marchini wrote:I was curious how the SPI engine works. Does it have a DMA controller? I only wonder because I worry about performance issues due to linux multitasking.
I imagined the video engine output would be a set and go item.
It really comes down to update rate in the end and what you can attain in the end product.
Good luck, can't wait to see some video.Tony M.
Hi thanks for the intrest.
Yes, it appears that this can be done.
http://www.raspberrypi.org/phpBB3/viewtopic.php?f=71&t=19797 Working code on the PI
http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf page 158
TBA at the moment. I'm collecting different bits of projects that each contain working sections that I think will be usefull in the final project - and trying to figure out how they work.
I agree on the video side - It's proberbly the PI greatest strengh. But at the moment I can't (am not good enough) to see how this could be simply and cheeply converted to output the various pixel and DMX format.
On a total different note: I spotted this today http://www.icrobotics.co.uk/wiki/index.php/Turning_the_Raspberry_Pi_Into_an_FM_Transmitter
It interested me because -
The GPIO can be mapped to a postion in memory.
The GPIO could be controlled at such speed.
The clock can be so accuratly controlled.
Thanks to all the other people who have posted - I have noted all your comments - just not had enough time to reply to all of you.
Found this Video on youtube - smoeone has made it work (it's not me yet).
