Possible cheap stro...
 
Notifications
Clear all

Possible cheap strobes

13 Posts
6 Users
0 Reactions
6,727 Views
Posts: 12
Topic starter
(@wjgiles50)
Active Member
Joined: 18 years ago
[#6216]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180323145254&ssPageName=MERC_VIC_RCRX_Pr4_PcY_BIN_IT&refitem=180320966467&itemcount=4&refwidgetloc=closed_view_item&usedrule1=CrossSell_LogicX&refwidgettype=cross_promot_widget&_trksid=p284.m183&_trkparms=algo%3DCRX%26its%3DS%252BI%26itu%3DUCI%252BSI%26otn%3D4

The above is a link to a Ebay post for some automotive strobe lights. The kind on emergency vehicles. Has anyone tried to use these in a display. Each light segment seems to be pretty bright and the price is not bad if you can directly atach the light module to a low voltage controller/ssr.


12 Replies
RPM
Posts: 1080
 RPM
(@rpm)
Noble Member
Joined: 19 years ago

I ordered some of the two unit (2X22) flashers to check out for something like this just the other day for an LED strobe design.

RPM

wjgiles50 wrote: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180323145254&ssPageName=MERC_VIC_RCRX_Pr4_PcY_BIN_IT&refitem=180320966467&itemcount=4&refwidgetloc=closed_view_item&usedrule1=CrossSell_LogicX&refwidgettype=cross_promot_widget&_trksid=p284.m183&_trkparms=algo%3DCRX%26its%3DS%252BI%26itu%3DUCI%252BSI%26otn%3D4

The above is a link to a Ebay post for some automotive strobe lights. The kind on emergency vehicles. Has anyone tried to use these in a display. Each light segment seems to be pretty bright and the price is not bad if you can directly atach the light module to a low voltage controller/ssr.


Reply
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

[There is no reason why you wouldn't be able to attach these to a low voltage ssr or even the controller itself...Once a few people run some tests I've asked about (watch the ssr thread) then you will see what I mean....I like this idea tho very creative and would be a great cheap strobe idea..
I love it...
Joe..


Reply
RPM
Posts: 1080
 RPM
(@rpm)
Noble Member
Joined: 19 years ago

I plan on either modifying a regular SSR for low voltage or may just do a completely new multi-channel SSR (either 8 or 16) design.

The strobes I'll be playing with are these:
http://cgi.ebay.com/ebaymotors/TR-2x22-LED-Strobe-Flashing-Grill-Light-Emergency-White_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262QQcategoryZ33713QQihZ024QQitemZ370155905741

I plan on having several 2 foot stars on my roof for next year and was thinking of putting an LED strobe in the middle of each one for a special effect.
I want to be able to flash them as well as control intensity, so the controller will need to be able to dim.
This should make for an interesting effect 😉

Robert


Reply
Posts: 188
(@awhaley)
Estimable Member
Joined: 18 years ago

A normal SSR will work at lower voltage... the gate resistor should be swapped out, and I believe the details on which gate resistor to use at which voltage can be found either in the wiki, or stickied in the SSR thread. If you're using DC strobes, you have to feed the SSRs DC that is rectified but not regulated, as if it's regulated DC, the triacs will never turn off. The DC SSR uses mosfets to avoid this problem. If you pay attention to current and voltage concerns, you COULD drive low voltage strobes straight off of a controller like the grinch that is designed to handle loads directly.

Robert, when you say being able to dim and flash, you're talking about dimming the led strobes? So you would NOT be using the control box that comes with that EBAY strobes? Assuming the control box just switches the LED modules on and off quickly, that should work, if you check the voltage and current requirements of the module and match it to a controller.

Art


Reply
Page 1 / 3
Share: