One-Channel Control...
 
Notifications
Clear all

One-Channel Controller

99 Posts
21 Users
0 Reactions
38.8 K Views
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Is anyone else using this WS2803 driver board?
Its listed as being done by Wayne James and Dan Blickensderfer.
Are they for sale?

Skunberg wrote:Cburg, there is a candy cane mod to leds using a WS2803 I think it was. The pixel chip would control 18 channels so 18 leds per cane and the board took standard Renard input. It was developed down under and a guy in Florida used them here on this forum. I don't remember the name of the thread. I may be able to find the name if anyone is interested?

Found the link http://www.ohio-lights.com/projects/candycanes/index.cfm


Reply
Posts: 119
(@cburg)
Estimable Member
Joined: 18 years ago
Skunberg wrote:Cburg, there is a candy cane mod to leds using a WS2803 I think it was. The pixel chip would control 18 channels so 18 leds per cane and the board took standard Renard input. It was developed down under and a guy in Florida used them here on this forum. I don't remember the name of the thread. I may be able to find the name if anyone is interested?

Found the link http://www.ohio-lights.com/projects/candycanes/index.cfm

I would be very interested to getting more info on this controller. I am not sure I am ready to have 50 canes with 18 channels each to sequence but the whole project would fit into my plan to include the scout troop in the project. ...:devilred: Does anyone know if there is an age limit on when a kid can use a scolder gun? haha


Reply
Posts: 119
(@cburg)
Estimable Member
Joined: 18 years ago
dpetryk wrote:Answers,

The $2.00 was for the demodulator circuit only. Not including all the other stuff for the controller. .......

Not sure if it would be a viable DIY project or not. I am open for ideas.

dpetryk,

I can fully understand your concerns. What I can tell you is that there is almost 4,000 views to this post, so some of us are interested. I would hope you would consider kicking some numbers around and see what floats. If I understand your system a person needs one "data injector at the start of the power line and a demodulator for every 4 channels of control. I am guessing that the 4 channels were meant to be mini strings of red,green,blue,white put together to form what I called a mega string I used on my mega tree. So for example I would need 16 demodulators for my 16 mega string tree. What would were you hoping to sell a system like that for?

2 Cents: If you came up with a PCB demodulator that did NOT use surface mount parts. People on the forum could buy the assembled "front end data injector" and just X number of PCB's. You could markup the boards so you could recoup some, if not all, of your investment and not have build everything. Going one step further maybe have both a 4 channel board and a 1 channel board.

If you do not have time for support, then just state that up front. There are enough smart people here to help answer questions once there are a few systems out there.

Good Luck to you whatever you decide!

Cburg


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
ukewarrior wrote:Is anyone else using this WS2803 driver board?
Its listed as being done by Wayne James and Dan Blickensderfer.
Are they for sale?

I know that down under one of the guy's split Dan's board in half and installed a board in each cane (actually I think Dan doubled the board but....) so yes a few are using it. Ray Wu had the chips, haven't checked lately. I liked the idea of putting it inside the cane and bought the Leds for it but my lack of board knowledge and not being able to get quantity put it on the back burner.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
ukewarrior wrote:Is anyone else using this WS2803 driver board?
Its listed as being done by Wayne James and Dan Blickensderfer.
Are they for sale?

I'll split 100 chips with you? If you can split Dan's board into one that will go inside a cane? Of course I'll take 50 of the boards.


Reply
Page 13 / 20
Share: