One-Channel Control...
 
Notifications
Clear all

One-Channel Controller

99 Posts
21 Users
0 Reactions
38.8 K Views
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago
[#10721]

One thing that I've been interested in for a while is creating small controllers. There has been a fair bit of interest in developing and building high-port-count controllers, and a lot less in the small direction.

About a year ago I designed a one-channel controller using a PIC10F20x. My intent was to use it to control one C7 or C9 light, although it should also be able to handle a mini-light or LED string. These PICs could then be daisy-chained in a manner similar to the Renard system (using a different, simpler protocol). One method used by another member of this group was to use the PIC with a MOC3023 to directly control the light (without using a separate triac).

There are situations where it would be better to use small distributed controllers, rather than larger ones with lots of cable running around. One situation that comes to mind would be lights suspended on wires (guy wires for shooting star effects, etc).

Anyway, I'm writing this primarily to see if this idea arouses anybody's interest, or not, and if anybody has other ideas for either creating or using this sort of device.


98 Replies
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I've been thinking "smaller" as well, Phil as I think smaller provides more control and more freedom in placement of a light inside a display. I've actually been fiddling with a similar idea -- a wireless SSR which would accomplish essentially the same end result.

I'm certainly interested in where you're going.


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago

Can you tell me what the advantage is for using a one channel controller over using a single channel, selectable channel daisychain ssr?


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

My first glance is that the controller could be set to operate on its own, such has having its own operating sequence and all it might need is something to trigger it. This would offload some of the processing the PC has to do. In a way, this might be similar to Helix.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago
Jrd wrote:Can you tell me what the advantage is for using a one channel controller over using a single channel, selectable channel daisychain ssr?

There are lot of similarities in the approach, but the controllers that I'm working on could allow a relatively large number of controllers to be daisy-chained together. The one-channel SSR would be limited to six or seven channels per RJ45 cable (plus the AC power).

Think lots of RenardSS-8 controllers, stripped down to only one channel and much smaller/lighter.


Reply
Page 1 / 20
Share: