Finally Affortable ...
 
Notifications
Clear all

Finally Affortable Snowfall Tubes (FAST)

448 Posts
68 Users
0 Reactions
263.1 K Views
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

The videos look good.


Reply
Posts: 999
(@ppohlman)
Noble Member
Joined: 19 years ago

That looks great!!

I'm assuming that you're still using the original PIC 16F688?

I'm thinking that I might have to start making some of these FAST for my display. Thanks for your great work.


Reply
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago

Correct still using Pic 16F688 seemed like an easy choice since most people have them and most of the boards use them.. This code would probably work on the less expensive chips Phil was talking about with some adjustments or maybe none.. I haven't looked at the data sheet as I don't have any to play with..


Reply
Posts: 999
(@ppohlman)
Noble Member
Joined: 19 years ago
chelmuth wrote:Correct still using Pic 16F688 seemed like an easy choice since most people have them and most of the boards use them..

That's one of the reasons I really like this project and what you have done. I always have a few of these lying around as backups. Beats having to keep a bunch of different chips on hand.


Reply
mlkren
Posts: 745
(@mlkren)
Prominent Member
Joined: 16 years ago

I am quoting your comment in the header of your code.

chelmuth wrote: I know this Code is UGLY but it works and I don't think it's bad for only using Assembly for about 4 weeks

I am also new to Assembly, what are you using for reference. I have found some old PDF books that mostly use the 16C84. Any advice would greatly be appreciated.


Reply
Page 9 / 90
Share: