Finally Affortable ...
 
Notifications
Clear all

Finally Affortable Snowfall Tubes (FAST)

448 Posts
68 Users
0 Reactions
263.1 K Views
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago

Ok, I got my LED's in from the group buy and away I go.. Here are some pics of my first one.. Being that I'm lazy and cheap I didn't feel like going to the store and getting any formica to start this project. I had an old screen out of an old rear projection tv in my garage. The diffuser on the front of the fresnel lens has nice groves in it perfectly positioned to run a razor blade down it to score it and snap to the width I wanted. The screen I'm using happens to be around 24" tall If I want different size tubes I just find larger screens. People are always throwing these TV's away now what I nice way to recycle part of them. On a side note the Fresnel lens is very fun to play with but very dangerous. WARNING : It'll make a spot and get it 2000+ degrees.. You can melt glass and or steal or give yourself a nice sunburn.. So here are some pictures of what I've completed so far.. Not pretty but functional and the screen was free.

FAST1

FAST2

FAST3

Reply
tweist
Posts: 394
(@tweist)
Reputable Member
Joined: 18 years ago

Looks great so far. Hope to see the finished product by monday, and of course we will need video of it actually working so we can all want to do it.


Reply
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago
tweist wrote:Looks great so far. Hope to see the finished product by monday, and of course we will need video of it actually working so we can all want to do it.

+1

\dmc


Reply
Posts: 20
(@wwwgator)
Eminent Member
Joined: 19 years ago

Hi, trying to follow along with the schem.
All the LEDs in both drawngs are labled D?
Although the color "wiring"diagram helps, still not sure what sequence to wire the LEDs.

Oh, btw, I am planning on using 3/4" green plastic Banding tape we use at work. We throw thousands of scrap pieces away daily...
If anybody wants to try ths flexible pcb, pm me


Reply
Aurbo99
Posts: 2804
(@aurbo99)
Famed Member
Joined: 19 years ago

Hi all, been semi-away for a bit.

I just came back from Home Depot after my weekly drool-fest in the store.

Flourescent tube covers.. about 2 bucks each and up to 4 feet long. They are clear and have caps on each end with an opening to allow the prongs to poke through.

Use those and a small pcb board for the hardware and run a ribbon-cable (or even a pair of cat5 cables) off the board and the leds soldered to the ribbon. a small elastic band keeping the ribbon cable taunt at the bottom, in the same fashion as the di-pole antenna tensioner.

Could not find a HD sku number online, but here is a UK store with the same items..


Reply
Page 4 / 90
Share: