Any chance a 595 board would directly drive 1(48 inch) of these? I was planning on using a DCSSR but I could save that for something else and I could control each tube separately.
cobraman44 wrote:Any chance a 595 board would directly drive 1(48 inch) of these? I was planning on using a DCSSR but I could save that for something else and I could control each tube separately.
Each strip draws about 25mA regardless of size, as only 1 LED is on full at a time... You may need to add some wiggle room if you add things like a tail ect. Anything that can source that can drive the FAST strips.
Actually even with the tail only 1 led is ever on at a time. 🙂
any plans for this to be able to do rgb in the future? Thought about just putting 2 or 3 strips with different colors in one tube.
It's possible to do an RGB, not sure if anybody has the plans to do it though. To do it easily, it would have to be done with something like the 5050 RGB led's because they are really the only ones that have individual anodes and cathodes.
