Finally Affortable ...
 
Notifications
Clear all

Finally Affortable Snowfall Tubes (FAST)

448 Posts
68 Users
0 Reactions
263.1 K Views
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago

The LED's are CharliePlexed not regular Matrix. Basically you use 8 pins connected to each other as follows with 2 leds one forward biased and one reversed.. so you get 2 LED's per connection then when you reverse the high and low of any pair the other LED lights..so wires go from
1-2, 1-3, 1-4, 1-5, 1-6, 1-7, 1-8
2-3, 2-4, 2-5, 2-6, 2-7, 2-8
3-4, 3-5, 3-6, 3-7, 3-8
4-5, 4-6, 4-7, 4-8
5-6, 5-7, 5-8
6-7, 6-8
7-8...

This gives you 28 paths and when you put 2 LEDs on each path you get 56 total LED's..

The LED's I plan to use are the Pure White SuperFlux LED's for the superstrips that tjeitzer (sp) just did a group buy for.. Since we ordered 10k'ish the price ended up being 4$ for 60.. so for a final cost I'm looking at $4 LEDs, $.10 Resistors, $.14 PIC Socket, $1.50 PIC16F688, Optional RJ45Jack for Power Connection $.80.. Plus what ever the Formica costs if not free. and i'm thinking the 4' Florescent projector tubes which are ~$4.. So I'm thinking easily less the $14 total possibly less that $10 if you only make 2ft tubes..

Yes I did write the code from scratch.. That was a learning process (read "much banging head on wall going why the $#%@ doesn't it do what i'm telling it to) considering I'd never touched Assembly before 2 weeks ago.

My ideal length was either 2 or 4ft depending on how the LED spacing looks once I get the actual LED's i'm going to be using in place..


Reply
Posts: 987
(@wirewrap)
Noble Member
Joined: 18 years ago

All I know is that I'd like to get ahold of that I&%$#%$^ guy "Charlie" (Charles Allen) and wire his arms and legs up in opposing polarities. It's called Charlieplexing, and it uses a minimal number of output pins to control a large number of LEDs. Theory says you can control N * (N-1) LEDs with N pins. So for 8 pins you control 8 * 7 = 56 LEDs. You only need to keep all potential paths below the forward voltage that will light the LEDs. WIERD guy!!

See this Instructable for a pretty good explanation: http://www.instructables.com/id/Charlieplexing-LEDs--The-theory/

🙂


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

Thanks for the great explanation guys. I have heard of Charlie-Plexing, but I didn't understand it like that. My head still hurts! So in your schematic, how are they numbered?

I bought a few extra in TJs GB, but not that many.


Reply
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago
kychristmas wrote: So in your schematic, how are they numbered?

Looking at the resistors they are in order.. 1-8 .. I used the same pins as the channel outputs for the renard software as I was originally going to mod some renard code but decided against it and rolled my own.. Maybe this schematic is easier to read?

snowfall colored

Reply
n8huntsman
Posts: 562
(@n8huntsman)
Honorable Member
Joined: 16 years ago

Check out pages 8 and 9 of this for a good schematic and explanation of charlie-plexing. This really helped be get my head around it.
http://downloads.eshepherdsoflight.com/Howidid-MidiTree.pdf


Reply
Page 2 / 90
Share: