Extending lights wh...
 
Notifications
Clear all

Extending lights which already have a controller?

11 Posts
5 Users
0 Reactions
5,201 Views
Cheater
Posts: 114
Topic starter
(@cheater)
Estimable Member
Joined: 17 years ago

Grabbed some from a store and yup, dirt cheap components. :p
I would tap the existing circuitry if I didnt have to turn the enclosure in to small chunks of plastic.
Damn IP44 waterproofing and the glue inside.

They use a 24VAC wall wart with 4 rectifier diodes on the board.
The chip magically makes 5v (well 4.2v) from what I assume are zener diodes.
There are two strings wired to a common positive rail, and each string is operated by two SCRs. No clue whats happening there except it looks like the board might have been designed for 4 channels.
Each string seems to register ~14v. No clue where that comes from.

Attached is a photo of the board with the traces overlaid.

christmasboard

Reply
Page 3 / 3
Share: