Ethernet Project
 
Notifications
Clear all

Ethernet Project

20 Posts
9 Users
0 Reactions
13 K Views
A Marchini
Posts: 426
(@a-marchini)
Reputable Member
Joined: 19 years ago
P. Short wrote:And here is the board...the color is a little off in the photo, but the actual board looks fine.

Now you just need JECs contact in china to proto 100 of them.
Have you looked at a different model that is more in use? Perhaps the small end of the III series?
Maybe even an Altera device.
The problem with general consumption may be programming these things.

Tony M.


Reply
Posts: 919
(@scorpia)
Noble Member
Joined: 19 years ago

Very nice phil, look interesting.

I would be very interested to see some assembly shots and some info on how you go solding up those chips.

Overall a very interesting project and one i would like to see more info on as it goes along.

Peter


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago

This project will probably never be released for general consumption. The reason for this is that I think that a better project would be one using the PIC18F66J60 (PIC18F core plus Ethernet MAC and PHY). It's cheaper, easier to find developers, and much easier to modify. One of the packages for that part is a 64-pin TQFP, which has fewer pins but the same pitch as the FGPA that I'm using. The only extra parts required are a few discrete parts, a regulator and an RJ45 connector (with integral transformer).

The main reason that I'm proceeding with the FPGA design is that the design is almost complete, and I wanted to do something different. The FPGA design will be good for dimming large arrays of LEDs (perhaps 768 RGB LEDs). For most other applications in this forum the PIC18 part listed above will do just fine (or one of its cousins with more memory). I'll plan on doing some home automation projects as well (unless I destroy the boards in the process of assembling them).

But I will continue posting assembly shots and info here.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago

There are some bugs in the logic for configuring the LCA...it will take some cuts and jumpers.


Reply
JonathonReinhart
Posts: 133
(@jonathonreinhart)
Estimable Member
Joined: 18 years ago

Phil, did you end up going any further with this project? I've found you guys' work very fascinating. Having done a little work with FPGAs in my sophomore-year digital logic class, I find it amazing how FPGAs can be well-suited for a complex problem that a microprocessor could barely even touch. Your calculations prove that.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Who's Paul?


Reply
JonathonReinhart
Posts: 133
(@jonathonreinhart)
Estimable Member
Joined: 18 years ago

Fingers were typing faster than the brain was thinking :rolleyes:


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago

Interesting idea I've been messing with.. Using a wireless router, with a usb port ( netgear ), and open-wrt. Theres ports for LLA done.. ( Linux Lighting Architecture ).. This works out pretty low cost, and very very flexible.. More as time permits.

( can i buy more time ? )

awhaley wrote:It DOES look like a tight soldering job.

If I were personally going to get involved in ethernet controllers, I would want it to be Artnet compatible and ACN capable in the future...

DMX really satisfies all my christmas lighting needs, but a cheap DIY Artnet dimmer, or Artnet to DMX node would find use for in other parts of my life. I sometimes wind up lighting shows for small theaters and use my laptop and Enttec dongle to control their dimmers... I don't LIKE trusting the Enttec dongle, and would LOVE to be able to output Artnet from the laptop (which the control software can do) and have a hardware Artnet to DMX node on the dimmer end. I often do this with a second computer, running softnode, which is an Artnet to Enttec program. I avoid some problems by running the Enttec dongle off a dedicated machine, but I'd love to get the enttec dongle completely out of the way... without buying a Pro dongle. For some reason I'd gladly spend the same amount of money on a crazy DIY project, but am too cheap to buy the nicer dongle. 😉 We're a strange breed....

I know that's not what your post was about... Sorry! But that's what I would want in a ethernet based controller.

Art


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago
JonathonReinhart wrote:Phil, did you end up going any further with this project? I've found you guys' work very fascinating. Having done a little work with FPGAs in my sophomore-year digital logic class, I find it amazing how FPGAs can be well-suited for a complex problem that a microprocessor could barely even touch. Your calculations prove that.

I've become a bit distracted, and haven't gone much further on this. I've got the boards in and one of them built up, it's just a matter of building cables and software for programming the various programmable parts on the board. I think that I'll get around to working on it again later this year.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago

Almost 4 years have passed, although I'm now thinking of reviving this as the basis of a four-universe E1.31 controller. It would only take minor modifications to the existing code to make it handle Renard, DMX, 2801, etc. Although the parts are fairly obsolete (especially the LXT905), there are more modern parts available.

The board has an on-board EEPROM for storing an individual MAC address, as well as support for updating the EEPROM. The board also handles ARP requests (returning an appropriate response) and ICMP Echo Requests (also return a proper response). There is logic for verifying the Ethernet, IP and UDP checksums, as well as calculating the same for the response packets. Currently the main limitation of this implementation is that the design only supports 10BaseT, not 100BaseT.

It's tempting...the main thing holding me back at the moment is the price of a VHDL simulator. The one that I used in the past was from symphonyeda, but maybe there are cheaper ones available now.


Reply
Page 2 / 2
Share: