Notifications
Clear all
Development
1
Posts
1
Users
0
Reactions
1,803
Views
Nov 20, 2008 8:10 pm
This is what i have planned for next year.
this year all my DMX controllers are mounted in old scrapped PC cases. they work well, but are very wasteful in space, and there is always an issue lining up mounting holes and missing existing gaps in the case structure.
all my central controllers will be mounted in 2RU cases with 4 port RJ 45s mounted on the front panel.
the cases will have:
- their own SMPS ( Dell slim line PS)
- RJ45 is Standard SSR output configuration (defined in Wiki) driven by ULN2803 for low side switching. Should be able to drive several LEDs strings directly without SSR.
- Each case will have DMX isolator / driver.
Status:
- 16ch DMX PMW controller built and tested ( using this year)
- 4 port Darlington driver board - at PCB shop due for testing this Christmas.
- Dell Slimline PS - purchased and tested
- Cases - designed, at brother-in-laws for comment and milling after Christmas ( his shop is real busy so I get to wait)
- DMX Isolator - waiting to another member to finish PCB of non powered isolated.
Costing - Case $55, Dell PS $10, Mega32s 8x$4ea, Controller PCB 8x$6ea, 4port RJ45 $6.5, RJ45 PCB 8x$6ea, Connectors $40, DMX Isolator/driver $25
Total cost -
AU$310 for 128 channel (excluding SSRs)

