P. Short wrote:It would be very cheap, takes basically a microcontroller, a serial chip (RS232 or RS485, to suit yourself), plus a PCB. There are lots of uControllers in the sub-$5 range (qty > 25) that would work. I'm also pretty sure that the Propeller could be made to do what is needed without assembly language, so one might prefer that over most lower-end microcontrollers.You're not likely to find something on-line that would do exactly the right thing, since the LEDtriks has a custom interface that, simple as it is, is not likely to duplicate anything standard out there well enough to work.
On the other hand, there is a $70 mini-itx PC mother board that you could use instead. Why re-invent the wheel?
--
Phil
I am still learning so let me just put this in launguage we both know. Can I be a beta tester and what could I do to help?
Ben
there is a $70 mini-itx PC mother board that you could use instead
Yes , 70 for the mobo ... another 50 ( or more ) for the mem , and about another 25 to 35 for the CPU and , oh , yeah , lets not forget the power supply - another 35 or so .
So , total .... ( without a case that is ) almost another $200 ....
And whats this ???
Why re-invent the wheel?
I thought this was a DIY forum ?
And might not be ... "re-inventing" the wheel" , but sure as heck could change it from a stone wheel , to updated, better one .. pnuematic , maybe LOL
While I could probably do something either with a PIC (PICbasic) or a prop I don't own a LEDTrix. I'm also not "up" on the nuts and bolts of how it works. So for me I would defer such a task to someone a bit more knowledgeable.
Terbo,
In all fairness, the numbers aren't that bad. The CPU is included (built-in), and memory isn't that expensive (unless you want to run Vista, maybe).
In any case, I was joking.
--
Phil
wow. Ben, I would be more than glad to buy you a board and parts so you could sit down with one and tinker. If we can't get this to work I was looking at goind DMX with Mr packet heads Xmas card
Ben
