If we could come up with a less cpu intensive way of controlling it so that it could be used simultaneously with the display from the same pc we would be moving in the right direction.
Now , please do not take this as being something I know about ( because I SURE as heck am TOTALLY lost ) , but , I was wondering .... if they make little hats and shirts that are free of a desktop PC for running LED panels , why can't someone figure out how to do so with the LEDTRIXs and have it per se ? This way , maybe you could use a PIC and program it to what you want , or even ... maybe ..... a COUNTDOWN clock ( LOL ) ? And maybe we could still control the ON/OFF with Vixen ?
TERBObob wrote:Now , please do not take this as being something I know about ( because I SURE as heck am TOTALLY lost ) , but , I was wondering .... if they make little hats and shirts that are free of a desktop PC for running LED panels , why can't someone figure out how to do so with the LEDTRIXs and have it per se ? This way , maybe you could use a PIC and program it to what you want , or even ... maybe ..... a COUNTDOWN clock ( LOL ) ? And maybe we could still control the ON/OFF with Vixen ?
I am patrailly lost but I remember reading the reason its a CPU hog is because of the refresh rate. Since the text it moving or something it gets that new signal alot and thats what takes all the processing.
Ben
Having a microcontroller inline would reduce the reliance on the PC. I own a commerical LED sign and that is exactly how its designed. I upload the text and graphics and it handles the display onboard. Very basic low PC cpu usage and runs off the serial port.
DynamoBen wrote:Having a microcontroller inline would reduce the reliance on the PC. I own a commerical LED sign and that is exactly how its designed. I upload the text and graphics and it handles the display onboard. Very basic low PC cpu usage and runs off the serial port.
So how hard would it be to make that happen on the Led tricks, and how much would that cost?
Ben
It would be very cheap, takes basically a microcontroller, a serial chip (RS232 or RS485, to suit yourself), plus a PCB. There are lots of uControllers in the sub-$5 range (qty > 25) that would work. I'm also pretty sure that the Propeller could be made to do what is needed without assembly language, so one might prefer that over most lower-end microcontrollers.
You're not likely to find something on-line that would do exactly the right thing, since the LEDtriks has a custom interface that, simple as it is, is not likely to duplicate anything standard out there well enough to work.
On the other hand, there is a $70 mini-itx PC mother board that you could use instead. Why re-invent the wheel?
--
Phil
