Has anyone looked into building a small flexible (hopefully) controller protocol converter? Specifically, I'm thinking about a standalone DMX Renard converter. In the case of DMX input, the device would have a starting address and channel count and would output that data in the Renard protocol. With Renard input, the device would push out a DMX stream offsetting the data by the starting address programmed in. That way you wouldn't have to reprogram all your PICs to support DMX nor would you need to run two totally different outputs from your show computer.
If the device has enough capacity, it could be expandable to support other protocol conversions (artnet/pixelnet/etc). Thoughts?
RPM has a similar device - the E1.31 to Renard/DMX protocol bridge. It takes in E1.31 and outputs four ports of DMX or Renard.
I saw RPM's device and RJ's EtherDongle but I was thinking something that can be used inline. Those 2 devices require the originating stream to be E1.31. I'm thinking for those folks who use mostly Renards but wanted to add a few DMX devices (or vise/verse). Personally I have 768 channels worth of Renard built and just started to add some DMX channels this year. For my arches and mini trees, I love the convince of the Renard protocol to daisy chain the controllers together without needed to re-program anything to add a few more channels (another arch/tree). Just wish there were a way to assign a starting address to that chain so it didn't matter how I hooked up that chain to the rest of the controllers.
sginut wrote:Just wish there were a way to assign a starting address to that chain so it didn't matter how I hooked up that chain to the rest of the controllers.
Your wish has been granted! You just need to reprogram the first micro with different code that allows you to pick the starting address. At the very end of this Wiki page is the code and the description of how to use it.
