Chip-On-Glass LCD
 
Notifications
Clear all

Chip-On-Glass LCD

5 Posts
3 Users
0 Reactions
3,780 Views
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago
[#18520]

Has anyone used the Chip-On-Glass LCDs? I've been checking them out and they seem like they might be a good fit for a project I'm doing. They are 3.3V (I'm using a uC that is 3.3V), and about 1/3-1/2 the price of a conventional character LCD. You can take a look for yourself here.

Beyond the advantages I'm wondering what the disadvantages or risks are of a COG LCD. Thanks!


4 Replies
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Only thing I can think of is ambient temperature. LCDs start to act funny when out of their "zone" and of course, if they freeze, it can damage it beyond repair and replacement is the only option.


Reply
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago
dirknerkle wrote:Only thing I can think of is ambient temperature. LCDs start to act funny when out of their "zone" and of course, if they freeze, it can damage it beyond repair and replacement is the only option.

Thankfully most of these are wide temp displays, so I suspect this won't be a deal breaker for me.


Reply
Posts: 183
(@buckanear)
Estimable Member
Joined: 15 years ago

LCDs slow down as they get cold. Most wont "freeze' until you are well below 0 Celsius.

As for CoG displays, yes they are cheaper due to no PCB material and often the driver chip is on a flex circuit. That poses a problem in that either you will need a SMD socket or a hot bar process to attach to a PCB.

Hot bar process has its own issues with drops. Avoid them like the plague.

james


Reply
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago
buckanear wrote:...either you will need a SMD socket or a hot bar process to attach to a PCB.

SMD socket is a none issue, but in this case the LCD I'm considering has through hole pins.


Reply
Share: