With the changes to the layout this year I have several new 350W SMPS out in the garden. Most are in fairly large cabinets with some form of passive cooling. This yeas things have got smaller so I am using Forced cooling.
So I have set out to make a simple fan controller.
Design Requirement:
- Operate of 12 Volts
- Keep fan OFF until needed
- At 40degree ( this is my first guess) turn the fan ON slowly)
- At 60degree and above make the fan go flat tack.
- Between these two set point, the fan speed is to be set proportionally
- Capable of driving 2x 80mm or 120mm fans
The Temperature measurement uses the Dalas DS18S20. I have a number left over from a previous project.
So the Prototype is finished and the PCB design complete. I hope to get them out to the fab house this week.
Yeah Yeah Yeah, I know most of you don't have a heating problem like us Aussies.
Cool... yea, we have snow on the ground so... no cooling problems here in NY.
hmmm, I could use this in my home entertainment center though, maybe.....:hmm:
I have a couple units that get really hot while in use.
Quite a few people are looking at mounting projectors in enclosures, this is a good solution for that.
Hey Matt,
Not trying to change direction on you but I bought this for my projection enclosure and put fans on it. has 2 usb ports on the back and the fans I bought have USB plugs on them. Hope this helps.
http://www.amazon.com/gp/product/B00NG9TSG4/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
If you want to see a real picture of it let me know I am not done with my encloure completely but it is installed and I actually tried it out last night while i was setting up and testing projection. heres the fans I bought but in hindsight I will probably order the 120mm because of airflow.
http://www.amazon.com/gp/product/B007QHKUXM/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1



