So I am already planning next seasons display with huge changes. I plan to build a 3d wall that spans the entire front of my home to transform it into a castle. I plan to drill holes in the wall and insert my lights from the backside of the wall. I run 100% led lighting and currently have a 167 channel display. I have already pre-ordered 30 strobes to place on the castle and plan on blue and white 5mm dome lights to be installed from the back. I plan to incorporate my spiral trees onto the wall by using them on top of the towers. There will be a central tower and two other towers, one being on each end. I still have to look into regulations in my area to see if I will have any code issues. Here is a castle pic I found on Google, and will use this as a general layout pattern. I will use this thread to post progress on the project.
That's awesome. I'm not ready to commit to that much work!
I am following this thread.
Good luck!
Holy cow Jason,
I am going to have to step up my game if I want to hang with you.
Let me know if you need help.
Brian
Good to see you Brian. I gave the family two different options for next season.. RGB, or the castle idea. They all voted castle. I plan to run my light strings vertical with 4" between strings alternating blue/white. The wall should have a similar effect as my roof bars did this year, just more lights. I'm going to mount one of my big snowflakes on each tower, and prob run icicle lights across the top. Thinking of doing rgb wall washers on it too. My bushes out front will be covered by the wall, so I'm going to have to find a new place to use the green and red lights I had on the bushes this year. Those are already mounted to fencing wire, so I may lay the flat on the ground on the hill out front. I'm also going to have to add white and blue to my mini trees. I am going to start by constructing the three main towers, then add in the flat walls. Question for you Brian... Do you think the city will be ok with it? It will be fairly lightweight, using 2x4 framework and either 1/2" or 1/4" ply.
Oh, and we are also going to build a Cinderella carriage and horse..
Triggerjay wrote:Question for you Brian... Do you think the city will be ok with it? It will be fairly lightweight, using 2x4 framework and either 1/2" or 1/4" ply.
I think you should be fine but this is the Cape and Code Enforcement is a pain in the butt. I say do it and if Code Enforcement makes a stink, contact the news. Check out the article I copied below (which has been removed from online) about the Cape trying to stop Neil Monkman's Christmas light show (off Nicholas) and then they dropped the whole thing after the news got involved.
Wink News wrote:Cape Coral family won't have to move Christmas decorationsPublished: Oct 24, 2014 5:22 PM EDT
CAPE CORAL, Fla.- One Cape Coral family puts on quite a holiday light show. They use the display to raise money for local police. But when they started to set up, the city stepped in, and the family got a notice saying they needed to move it.
The light show has been happening for years. But a couple of days ago, the homeowner received a notice from Code Enforcement saying his decorations were in the right of way and needed to be moved.
When WINK News brought the issue to the city, Code Enforcement changed their minds.
For the Monkman family, it's go big or go home when it comes to Christmas lights. But in their case, home on the 900 block of SW 4th Avenue is exactly where this elaborate show comes to life, delighting hundreds of people every year.
Money raised from the event helps purchase safety vests for police canines. Neil Monkman is the man making it happen. "The EMTs will come through to see it, the firetrucks will come through and turn their lights on," he explained.
But as he was setting up his decorations for this year, he got a notice from Cape Coral Code Enforcement, saying an anonymous person complained. Because of that complaint, the city asked him to move his decorations out of the right of way.
"It's absolutely appalling that somebody doesn't have the common sense to say 'it's a Christmas decoration!'" he said. "I understand people have jobs to do. When I called them, I said 'how about I get a permit?' They told me 'no.'"
Friday, WINK News asked the city for a comment on the case. The city's response? It's dropping the matter completely, now saying, based on the complaint the city received regarding lights and trash, there is no code violation.
"I think it's good because I don't think it really bothered anybody, but one or two people," said neighbor Chester Boles.
"It should of been the right thing to do before anyone wrote the violation," said Monkman. "If you look at it, it's taxpayer dollars. We've now put how many man hours, days, of our taxpayer dollars deciding whether or not I can put a Christmas tree near the street."
Monkman will be busy puttng up his display until the day after Thanksgiving, which is when the show officially starts.
This is the second time in a few weeks Cape Coral's code enforcement has taken heat over a violation. The city originally asked a resident to move American flags out of the right of way. The move sparked protest from residents, who said they had the right to put American flags wherever they wanted.
After the protests, the city changed its mind and said it would not take any further action against the man.
You know you willl have to leave it as a castle once you're done right? The family probably wont let you take it down. 😆
Thanks Brian. I had heard something about it, but never saw the article. I had emailed Neil a few days ago through his website about code enforcement and my plans, but have yet to get a reply from him. I am hoping to start construction on the first tower in the next couple weeks. WayneJ, they better let me take it down. I could set it up earlier though and use it as a Halloween prop too.
Sounds like a project! I'd like to create a front for my house but I'm not sure how to attach it. I have vynil siding and can't put holes in it. How do you plan on attaching yours?
Guy wires to the ground, and I have pillars out front I plan on using ratchet straps around.

