Esp Code for variou...
 
Notifications
Clear all

Esp Code for various modules

35 Posts
5 Users
0 Reactions
34.7 K Views
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

UNIFY is the branch where 4.0 is being developed. anything added to 3.x today would get left out of 4.0 unless you tell us you did it.


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago
angus40 wrote:ESPixelStick ver.3.1 Getting 2 errors trying to compile .
Anyone else getting this ?

This is a debbie downer as I cannot get this moving forward.
Any help would be great .


sketch\EFUpdate.cpp: In member function 'bool EFUpdate::process(uint8_t*, size_t)':

EFUpdate.cpp:68:57: error: 'U_FS' was not declared in this scope

                         if (!Update.begin(_record.size, U_FS)) {

                                                         ^

C:\Users\angus40\Documents\Arduino\ESPixelStick\ESPixelStick.ino: In function 'void setup()':

ESPixelStick:155:26: error: 'class EspClass' has no member named 'getFullVersion'

     LOG_PORT.println(ESP.getFullVersion());

Well I have this solved . Frustrating to say the least as the issues had Zilch to do with the EspixelStick Firmware .
Solution =>
Update to the newest release of the IDE
Update Spiffs Plugin
Voila !


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago
MartinMueller2003 wrote:UNIFY is the branch where 4.0 is being developed. anything added to 3.x today would get left out of 4.0 unless you tell us you did it.

Ah . Thanks Martin . Unfortunately my coding skills are mere hack-n-patch only .
It's great how flexible the EspixelStick is to additions without breaking things ,which I am real good at .


Reply
Posts: 87
(@tfmacz)
Estimable Member
Joined: 19 years ago

This is the code I have been looking for.
I have WS2812B strips  300 LEDs long.  I am only adressing the first 170.

I see mention that multiple universes are possible.  Sofar if I add a second it doesnt run the second strip correctly.
This is cool...


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago

Esp32 and Servo

Here is a bare bones E1.31 sketch .


/*
  All credits to :
  Shelby Merrick for his E131
*/

#include <pwmWrite.h>
#include <ESPAsyncE131.h>
#include <WiFi.h>

#define UNIVERSE 1               // First DMX Universe to listen for
#define UNIVERSE_COUNT 3
#define CHANNEL_START 1

const int servoPin = 19;
uint16_t servoMinUs;   // minimum servo pulse in μs (544)
uint16_t servoMaxUs;   // maximum servo pulse in μs (2400)

const char ssid[] = "";         // Replace with your SSID
const char passphrase[] = "";   // Replace with your WPA2 passphrase

// ESPAsyncE131 instance with UNIVERSE_COUNT buffer slots
ESPAsyncE131 e131(UNIVERSE_COUNT);

Pwm pwm = Pwm();

void setup() {
  Serial.begin(115200);
  delay(10);
  
  pwm.attachServo(19, 8, 544, 2400);

  // Make sure you're in station mode
  WiFi.mode(WIFI_STA);


  if (passphrase != NULL)
    WiFi.begin(ssid, passphrase);
  else
    WiFi.begin(ssid);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
  }
  
  // Choose one to begin listening for E1.31 data
  //if (e131.begin(E131_UNICAST));                              // Listen via Unicast
  if (e131.begin(E131_MULTICAST, UNIVERSE, UNIVERSE_COUNT));   // Listen via Multicast

}
void loop(){

  int val1;

  // Parse a packet and update pixels
  while (!e131.isEmpty()) {
    e131_packet_t packet;
    e131.pull(&packet);     // Pull packet from ring buffer
    uint16_t universe = htons(packet.universe);

    if (universe == 1) {
      val1 = map((packet.property_values[(CHANNEL_START + 0 )]), 0, 255, 544, 2400);   // channel 1
    }

    if (val1 <= 255 || val1 >= 0) {  //Servo 1
      pwm.writeServo(19, val1);
    }
  }
}


Reply
Page 7 / 7
Share: