not seeing controller in browser

[ametsman]

I was running FPP 1.8 hardwired to a F16V3 up until now. I purchased a new Pi and installed FPP 7.5. I set everything up in FPP like the old one. The old FPP is not powered up. My sequences ran just fine. My problem is when I go to a new browser window the controller doesn't open up, it says timed out. If I start up the old Pi and and connect the F16 to that thru hard wired it opens in a browser window.

 

[MartinMueller2003]

Have you explicitly enabled IP forwarding? AKA bridge mode

 

[ametsman]

Yes I have

 

[MartinMueller2003]

And what is the IP address on the WiFI

 

[ametsman]

Here are screen shots

 

[MikeKrebs]

I think you are getting help on the other board that will get you there. Post the results back here. Small changes to the gateways and forwarding will fix most of the problem but I think you are headed the right path on FalconChristmas.

 

[ametsman]

I think I will jump in the Zoom room when I get a chance. I'm sure it's something simple.