FPP - looking ahead, visual programmer question, QLab trigger question, and OSC question

[d0ugparker]

I'll be getting a Pi3B+ and a 16-servo hat to control a six servo bucky skull using FPP. I'm just starting to dive in. I looked for an FAQ, and I searched through the forum, but didn't find what I needed.

Is there a VSA (Brookshire Software, Visual Show Animation) open source software alternative to manually, visually, program FPP to run the bucky skull's show?

Can QLab trigger a dimmer pack or DMX relay to start the FPP's bucky skull sound and servo control sequence (I'm guessing via GPIO)?

Can QLab talk to FPP via OSC the same way TouchOSC can talk back and forth to QLab via OSC?

Thanks!

 

[MartinMueller2003]

This might be a better question for the FPP forum.

 

[d0ugparker]

Thanks. I thought that's what this was, Forums > Software > FPP - Falcon Player

Do you mean another FPP forum on a different site?

 

[MartinMueller2003]

The Falcon team monitors this forum a bit. They have their own dedicated forum for asking in depth FPP questions. I suspect your question is very "in depth". You can access that forum at this link: https://falconchristmas.com/forum/index.php/board,8.0.html

 

[MartinMueller2003]

And please put a summary of what you find here so the rest of us can also learn a few new things.