View source for RS485 Splitter

The RS485 splitter is a 4-port non-isolated splitter, designed for driving the color stick, but useful for driving any RS485 devices, including DMX or Renard. Please note that there are a number of options that can be selected when building the splitter.

==BOM==
Note that none of the components are critical; feel free to substitute parts with similar ratings.<br />
From Mouser: <br />
TS78L05CT|1 <br />
81-GCM188R71H104KA7J|3 <br />
810-C1608X7R1A334K|1 <br />
701-SP485RCN-L|1 <br />
595-AM26LV31ID|1 <br />
301-120-RC|1 <br />
301-100-RC|1 <br />
538-22-03-2021|1 <br />
538-22-03-2031|1 <br />
649-65474-002LF|2 <br />
651-1935161|1 <br>

Optional - for on-board power-on indicator<br />
301-1.0K-RC|1 <br />
720-LYQ971H1K136|1 <br />
Optional - output connectors, may chose other connectors or hardwire.  Add two more if desired for input and passthrough<br />
22-28-1040|4 <br />
Optional - RJ45 input connector
571-5520260-4 <br />
Optional - if using the RJ45 input connector with the Renard pinout.  Not needed for DMX pinout <br />
301-0-RC|2 <br />

==Schematic==
[http://ADD_IN Schematic (PDF)]
==PCB==
[http://ADD_IN Front-side copper (PDF)]
[http://ADD_IN Back-side copper (PDF)]
[http://ADD_IN Front-side silkscreen (PDF)]
[http://ADD_IN Back-side silkscreen (PDF)]
[http://ADD_IN Gerbers (ZIP)]
==Assembly Manual==
[http://ADD_IN Assembly manual (PDF)]