Oif its the mounting kit from diyledexpress they have a pdf of how controllers mount on the enclosures page. Travis
So how exactly does the web server work? Ive tried going to the address it says in the menu but it never connects. Travis
So have you already sequenced and this is the final stage or is that coming? Travis
shanicus wrote:Actually the SanDevices E682 does allow you to control Renard devices. In fact I am using one of the clusters on my SanDevices 6804 to...
Kev7274 wrote:So,am I just using the switch? Then feeding the SS24 and E682 from it? you still need the bridge to run the ss24. So yours should be...
Thats your problem most likely, the 50 extra you patched in to account for the 682 needs to be on the right side under controller ouput area not under...
How do you have your megatree setup in vixen? And is your star on the same element or is it a separate one? Travis
mt2525 wrote:Travis......success.....had to define legs 13 and 14 as having 100 pixels each and not map those second 50 pixels. Mapped the second 50 p...
Re: ¿spɹɐʍʞɔɐq ƃuᴉuunɹ sʇɥƃᴉl ʎɯ ǝɹɐ ʎɥʍ Oh man I have a headache now......... Travis
Might have to get a large one too. Travis
Edited for channel counts as my math was off but still could be so double check it. Travis
mt2525 wrote:Hi Travis....when I change outputs 4-1 through 4-4 to 100 pixels which are legs 13,14,15 and 16 of the mega tree to support legs 15 and 1...
mt2525 wrote:Hi Rick.....Thanks for info. Now here is my dilemma. I got it working using the screenshot you posted above.....also thanks to Travis.......
Id be in for three small and 4 medium ones. These are awesome. How are these going to be shipped? Travis
Those look awesome! I want! Great job on those. Travis
