Sammy2004
@sammy2004
Estimable Member
Joined: Jan 15, 2017
Topics: 11 / Replies: 116
Reply
RE: Startup Project - Leaping Arches

Skunberg wrote:Yes, I'm sure you can frost the tube. I've used a green sotchbrite scrubby pad to scuff for a frosted look. You may want to go to a win...

10 years ago
Reply
RE: Startup Project - Leaping Arches

So i ordered a box in which i can mount the E682 and 2x powersupply. With some space left for the wires etc. Only requires me to drill a few desired h...

10 years ago
Reply
RE: Startup Project - Leaping Arches

any ideas on the bending of an 6'6" acrylic tube? 1 37/64" OD with 1 11/32" ID ?

10 years ago
Reply
RE: 2" HDPE arches almost there

mickr wrote:Hey Sammy, I live in the UK and had the same problem as you! I did find someone (bic warehouse) on amazon selling some sharkbite pex pipe...

10 years ago
Reply
RE: Startup Project - Leaping Arches

I will have 4 arches with 1 pirb 3b. E382 with 12dc powersupply. For future needs will mount 2x 400W powersupply and the e682 into 1 outdoor junction ...

10 years ago
Reply
RE: Startup Project - Leaping Arches

Ordered my waterproof juncrionboxes yesterday. Should fit controller and two powersupplies just nicely.

10 years ago
Reply
RE: Startup Project - Leaping Arches

Skunberg wrote:Bigger is the main reason for HDPE. 2 inch over 1 inch is a dramatic difference. And the pixels inside the tube are farther away from t...

10 years ago
Reply
RE: Startup Project - Leaping Arches

Yeah pex should work just fine. I just have my mind set on something bigger than 1 inch. So have o figure out acrylic tubing

10 years ago
Reply
RE: 2" HDPE arches almost there

Awesome! Wish I could get that in the Netherlands. Just no way to ship it. And nobody who can ship those length to me. 🙁

10 years ago
Reply
RE: HPDE Strait Tubing?

FBiff wrote:Wait no torch...how the heck am I supposed to bend it on job. J/K I wholeheartedly agree with you and your safety concerns are valid. You...

10 years ago
Reply
RE: HPDE Strait Tubing?

FBiff wrote:If you try again you might want to try sanding with a much finer grit to create a more dense pattern with less depth creating a better dif...

10 years ago
Reply
RE: PVC Arch frame question

craiz wrote:Thanks for the suggestions. *After gluing one end into the T was able to bend the pipe without breaking the T. *Sch 40 pipe works fine for...

10 years ago
Reply
RE: PVC Arch frame question

Also. What might help ... Bend It into the perfect shape u desire. Then poor in boiling water. Let it sit till the tube is warm on the outside. Empt...

10 years ago
Reply
RE: What is your favorite length for Ach tubes?

I think the diameter is important. But also the view distance. So if your 40ft from the road. Then yeah. 2"OD. But anything under 33ft or so I would s...

10 years ago
Reply
RE: HPDE Strait Tubing?

Joe wrote:Price wise, you may be be best off going with something like this and lightly sanding it to make it appear cloudy. The longest size they h...

10 years ago
Page 7 / 9