Update: My problem was a programing error not a power supply issue. I contacted Jim at Sandevice and discussed the possibility of an issue with his co...
Yes, ive done that already. I've checked the output too. It all leads to run length. Bummer, I was hoping for a magic bullet. I'll keep everyone po...
Hi All, I have all (4) of my arches built and tested and they work great from the test tab in Xlights. Each 12 volt arch (60/20) has (59) pixels and...
Welcome to the group and bring your check book!
I bought a serial port on ebay. Cheap and easy to install.
smeighan wrote:This highlights something about single channel ad lights, all of the effects generated in xlights are rgb. Every effect generates 24 bi...
Success! It was not the reinstall but instead, when you are working with AC lights, the color box on the sequence page needs to be either blank or whi...
Thanks for the imput. I'm going to try to uninstall/install and see if that works too. Then try messing with the colors if that doesn't work.
DanJ wrote:You should post over at the nutcracker website. One of the dev team guys usually helps us when we get stuck.. I am using AC models in my ...
They are set to white in the model setup. I'll change the color to something else and see if that helps. Thanks for your help.
No, the LEDs on the renard light in the test mode but not when i run a sequence.
That's what i was afraid of. Thanks for the response.
Has anybody tried to paint these strips? I bought them in white but would really love them to be tan to match the paint on my house.
