pjones
@pjones
Estimable Member
Joined: Dec 18, 2015
Topics: 6 / Replies: 112
Reply
RE: Only in Canada EH !

To be fair, they don’t look very well attached. You can only see small slivers of duct tape holding them on.

6 years ago
Forum
Reply
RE: Only in Canada EH !

Here is a screen shot of the car shown in the link... Why don’t they just drive a Moose like a normal Canadian?

6 years ago
Forum
Reply
RE: How do I use/create a hardwired network connection for my falcon f4v3?

blurredvsi0n wrote:There are only 2 Ethernet ports on my modem/router Sent from my iPhone using Tapatalk Are they both occupied or do you still ha...

6 years ago
Reply
RE: How do I use/create a hardwired network connection for my falcon f4v3?

MartinMueller2003 wrote:You have at least one computer on your home network. Somehow you connected that computer to the home network. How did you do t...

6 years ago
Reply
RE: Preventing light displays from getting stolen?

I saw one member ran an extra 2 wires to each piece of equipment. Those two wires were connected to their house alarm system. If someone tried to unpl...

6 years ago
Forum
Reply
RE: Pole Pins for black iron pipe?

Oh... it looks like it is an inside diameter pipe that slides inside your other two pipes to work like a coupling. Am I seeing that right?

6 years ago
Forum
Reply
RE: Pole Pins for black iron pipe?

I’ve never seen this. What is a pole pin?

6 years ago
Forum
Reply
RE: Help me ID replacement part needed for this projector board

Don’t be too hard on the little guy. That is going to be your best sidekick in future Christmas light projects 🙂

6 years ago
Reply
RE: New Toy Cheaper in the US than China .

Link goes to Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN) For Use With ESP32-S2 $45

6 years ago
Forum
Reply
RE: Crazy thought/idea?

I’ve used MagicPlan in the past and it does similar to what you describe. But I think what you are requesting requires a 3D view. I love the idea thou...

6 years ago
Reply
RE: Crimp or solder wire tips

angus40 wrote:Spade will not work . Ring or split ring will work as they have relief for the screw . Hands down ring is the best . I think we are...

6 years ago
Reply
RE: Crimp or solder wire tips

For the power supply connection you posted I would suggest using spade or ring terminals. Screw heads don’t like to be side loaded and can break the h...

6 years ago
Reply
RE: DHL shipment route and customs makes no sense

I’ve been stung by DHL too many times in the past. I’ve stopped using them now. It’s robbery. Other shipping companies seem to manage without such hig...

6 years ago
Forum
Reply
RE: Power Supply with Nichrome Wire

Isn’t it the resistance that determines the amperage if the voltage is constant? E=IxR So in theory a bigger power supply should let you use a shor...

7 years ago
Reply
RE: Looking for Grinder Stand Foot

Or dump the 3 remaining feet and plastic-dip all 4?Sent from my iPhone using Tapatalk

7 years ago
Forum
Page 2 / 8