As far as pics or vid I do have a behind the scenes snippet, but it just shows it in action, nothing you haven't seen already. I used the ledtriks ...
What's scrolling is the Trix-C in standalone saying "Please Tune Your Radio to 105.3FM."
Yeah, they are clips that I got from Target. They usually have a box that has 100 cnt for about $6.00. I slid each light under the ridge line shingl...
Awesome find Wayne. Looks like I have quite a bit of de-soldering to do in the future.
The only board that I can think of that would allow you to dim DC and AC would be a REN 64. You would have to have a separate SSROZ handling your 240...
At least you didn't have a board give off the gray smoke of doom and a nice pop. I put the jumpers in the wrong way for my 120V hookup on the Renard2...
Taken from the WIKI: "The DCSSR is designed to switch DC loads between 0 and 30 Volts. The MOSFETs are rated to greater than 10 Amps each, however as...
**NOTE TO SELF** Buy boards from Wayne and get a retainer! 😉
Thanks CTMAL have my Pickit 3 ordered now. I was contemplating a bonafide Pickit 3 or a clone, but since this deal was offered I'm taking the bonafid...
I know that Robert Jordan does this type of power injection of 12V into the cat5, but he has a separate hub where it happens and has had good results.
There are different applications that will run the 5V for RGB strings. I know that DMX type controllers would allow the use of 5V to power your RGB s...
I need to win the wife over, but if I say road trip to her I am sure that I will be able to sway her. I'm interested!
Happi burthdai chris!!!!!!!!
