I routed this board on my cnc router and after populating it, it worked for a few days. Finally had time to go through the schematic and troubleshoot...
I had a heartbeat on the diagnostic chip but I had all the other pics out so when I installed the other pics the diagnostic pic would not do anything.
I finally found the problem the new oscillator was bad and had to repair a trace under it. Thanks for your help.
Pic chips work fine in my other board and I have 3.5 volts at pin 2 on u10 which is the same as my good board.
Yes and it got me to the diagnostic firmware with internal oscalator but doesnt say what one led on first channel means.
I am about 80% done putting up lights and displays, hope to have most of it running Sunday afternoon so I can test it. As long as rain stops long enou...
Did you get it from RPM? If so check with him there were a few voltage regulators that were not the correct part.
I am a plant electrician for a food processing plant which involves working on everything from plc's to light tubes and then some. I also farm and rai...
I Like it!
Had the same problem and I redownloaded 2.1.1.0 from the website and it worked fine. Never did get 2.0 to work on win7 64bit.
I,ll probably stay up all night cramming for this one. That's after putting one more string of lights on after the ball game after supper and before m...
Started making nativity scene this year. Mary, Joseph and baby Jesus in manger. Turned out good using 3/8 rebar shaping to a pattern drawn on cardboad...
Awsome story God never stops amazing me with what He will do. And I never get enough of it.
