libby2cm
@libby2cm
Estimable Member
Joined: Oct 31, 2012
Topics: 2 / Replies: 202
Reply
RE: Looking for SPT-(1 or 2) wire in Dallas, TX area

16-2 LV lighting cable works great too.. And it's made to be outside. I use it for all my whips. Sent from my XT1575 using Tapatalk

11 years ago
Reply
RE: Can you leave a pixel on too long?

Yea, you can get burn in, so to speak.. Not the same technically as crt burn in, but net effect is the same.. Which is why you see it on oled screens....

11 years ago
Reply
RE: Fog Machine Trigger

I used a custom komby board for my fog machine this year. Fog machine came with a wireless remote, so i elected to modify the remote rather than hack...

11 years ago
Reply
RE: Question on proper power injection

You will likely need to inject more often than 128pixels.. Depending on wire gauge, pixel voltage, and pixel levels. For 12v pixels, I'd inject every...

11 years ago
Reply
RE: GECE with DIYLEDExpress Waterproof PS

Have you made sure its putting out 5v from the PS? How long is your run from controller to pigtail? With a 50 node string running at 5v, voltage dro...

11 years ago
Reply
RE: C7 PixaString 4 wire connector pinout

Haven't used them, but do they come with connectors? They are all built with ws2811 drivers I believe so you only need 3 pin for both..the globe is j...

11 years ago
Reply
RE: Megatree Pixel/RGB Mounting Strips

Will the black have the bigger holes for gece/pixabulbs?

12 years ago
Reply
RE: Komby rf pixel control troubleshoting

michaelc wrote:Is there somewhere that explains how to use some of the test sketches? Rainbow is pretty straight forward and eliminated my receiver c...

12 years ago
Forum
Reply
RE: Komby rf pixel control troubleshoting

michaelc wrote:This seems like the appropriate thread to jump in on with a komby issue. I have 5 mini trees (50 Pixels each). Three are on one Univ...

12 years ago
Forum
Reply
RE: Pixel question

Yea likely moisture in pixel..I have been splicing pixels all season on my megatree because of crap waterproofing.

12 years ago
Topic
Forum
Replies: 13
Views: 5595
Reply
RE: Reliable Range of Komby RF Transmitter "Sandwich"?

jchuchla wrote:When doing those batter walk tests, keep in mind that your body has a lot of impact on performance. You really need to set it down and ...

12 years ago
Reply
RE: Reliable Range of Komby RF Transmitter "Sandwich"?

mschreuder wrote:I would want to keep the transmitters accessible for troubleshooting. It is working flawlessly right now at 7ft, I have no doubt the ...

12 years ago
Reply
RE: Reliable Range of Komby RF Transmitter "Sandwich"?

jchuchla wrote:Someone else could explain this better than me. But that slice is not part of the ISM band in the U.S. That range is limited to "spurio...

12 years ago
Reply
RE: Reliable Range of Komby RF Transmitter "Sandwich"?

jchuchla wrote:The 2.4g model stops at 2.485. It wouldn't see any of the nrf channels above 85. It's cheaper because it has only one radio and its a f...

12 years ago
Page 2 / 14