jssr
@jssr
Eminent Member
Joined: Jun 14, 2021
Topics: 4 / Replies: 35
Reply
RE: Steuerung Teensy 4.1 mit OctoWS2811 Adapter und xlights

Happy too early. Lights work, but as soon as I want to enter another controller or have saved one, I can no longer start Xlights. If I delete all the ...

5 years ago
Forum
Reply
RE: Steuerung Teensy 4.1 mit OctoWS2811 Adapter und xlights

It finally works that the lights are working properly. You had absolutely right that the sketch by Heinz Doessegger must remain as it would be written...

5 years ago
Forum
Reply
RE: Steuerung Teensy 4.1 mit OctoWS2811 Adapter und xlights

Hello, in the sketch it says, for example: char * header = "VIXStart"; or waitForVixenHeader () ;. I had already entered VIXStart in Prifix but nothin...

5 years ago
Forum
Reply
RE: Steuerung Teensy 4.1 mit OctoWS2811 Adapter und xlights

Hi there, I looked again at xlights to enter the VIXStart somewhere. But there is nothing to be found where the text has to go. Even if I enter VIXSta...

5 years ago
Forum
Reply
RE: Steuerung Teensy 4.1 mit OctoWS2811 Adapter und xlights

As it stands, I've achieved a little bit of success. It is clearly due to the sketch. Xlights can talk to the Teensy without any problems, Xlights als...

5 years ago
Forum
Reply
RE: Steuerung Teensy 4.1 mit OctoWS2811 Adapter und xlights

Hello, First of all, thanks for all the information from you. xlights may not be the right program for me. Meanwhile xlight doesn't start at all and I...

5 years ago
Forum
Reply
RE: Steuerung Teensy 4.1 mit OctoWS2811 Adapter und xlights

Hello Martin, does that mean that the sketch for Vixen cannot be rewritten in such a way that xlights knows what to do? In German forums, nobody can h...

5 years ago
Forum
Reply
RE: Steuerung Teensy 4.1 mit OctoWS2811 Adapter und xlights

Hi Mike, this is a message that I did not expect. My information about the file that has to be uploaded for visas is only intended for vixen. In the f...

5 years ago
Forum
Topic
Page 3 / 3