dmoore wrote:Mounting Substrate (PVC pipe with clips, pop-in strips, etc) Individual Clips / Mounts * Good at random or non-linear mounting methods ...
dmoore wrote:We switched to 4", 8" and 12" due to lack of demand for 10" and requests for a smaller spacing. Ok, thanks. I guess I get to be the od...
I posted this question on the pre-sale thread, but David, are you going away from the 10" spacing in the future? It was my first year with the Brilli...
I've been using the 10" spacing BrilliantBulb this year - are you planning on continuing to offer this spacing?
dpitts wrote:Using a 800Mhz+ processor with two built-in real time processing units that can do real multicast is a proper controller. Not to mention ...
Here's my update on this: I decided on a two-minute sequence to repeat between shows and no blinking. Also tested 30 seconds and that works too. Runni...
Sent! Set up my Pi, hope to be running tomorrow!
Gilrock wrote:Use the Twinkle effect and play with the sliders. This works if you want a slow "blink" effect, which is nice but not exactly what I w...
I'm running off of the controller, and for the first 50 pixels I don't recall seeing a huge drop off. However, I expect as I am closer to 100 pixels ...
I think you're going to end up losing 3% or so over 50', so you're at 11.6V, if you used the same power supply to inject at the end of the string like...
When doing larger lengths, such as house outlines, are installs running very long lengths of cable back to the sourcing power supply? From the wiki h...
Technician wrote:On another discussion, the LAME encoder was discussed at length. The issue is it is illegal to bundle with a product such as Audacit...
jnealand wrote:Use the LAME addon. Very simple. Absolutely understand it is simple - I've seen the tutorials. However, I came across this and it g...
