The FM board is being FCC certified for US only at this time. The FM board has an 1/8 in audio out line jack that you can use to drive your own trans...
I don't sell the products. I've designed multiple items - all of which are only available through HolidayCoro. If you are interested in stand alone ...
That's correct - looking forward towards this upcoming season. Joe
Parts both sides - surface tension from solder paste. You can consider putting you caps and resistors on the bottom which really open up the top. ...
ags0000 wrote: I don't plan to use a reflow oven so I *could* have SMD parts on both sides, I suppose. But I plan to have only THT on the other side. ...
ags0000 wrote:@JHinkle thanks for the input. It is helpful. 1) I think I mis-remembered a previous design where I used tantalum for the regulator (al...
Tantalum is the wrong material for decoupling caps. You want Multilayer Ceramic Capacitors. Multilayer Ceramic Capacitors will cost you less than 9 ...
ags0000 wrote:I'm working on a purpose-built controller based on a BeagleBone Black and custom cape. The software driver seems to be robust - but the ...
Carl: Save a copy of the existing HLS.exe. I took a stab at changing my group size from 10,000 to 20,000. Don't know if THAT is the fix but a New v...
Carl: Zip up your sequence folder and send it to me so I can see if I can quickly increase it. Joe
No. The Web site will service all the original HinksPix controller boards and All models of EasyLights controllers. Joe
Thanks for asking. The EasyLights web site will be open to the public this summer at which time all the additional capabilities of our controllers wi...
To help, I need to understand what is happening. Is there a E131 transmitter actively sending data (Vixen, Xlights, FPP, etc)? With nothing attempti...
Are you using a static IP address or dynamic?
akafoury wrote:Hello, I'm brand to new to Vixen and Christmas lights and just wondering how long it generally takes you to finish a light show for on...
