using the channel test function i get none to very little dim in the output. Itis strange sometimes I get down to 30 and they start to waver. Some of ...
Well, I have tried powering off/on the Ren-T as it is right next to my show computer. It is on all the time no timer to turn it on. I thought that mig...
Ditto on ebrady's post. I have my computer set to reboot each day then has a scheduled job set to start Vixen. The job runs for 8 hours then terminate...
Interesting. I put together several of the Super Strips to test on my 2 story eaves. Not happy with the color mixing. The Rainbow's mix really well f...
bcstuff wrote:Amps x Volts = Watts 20a x 5v = 100W At 75% efficency: 100 watts / 75% = 133 watts 133W / 110v = 1.2 amps AC Got it. thanks!
Wow! I know nothing about DC power. 110v AC sure seems to be easier to deal with. . . . So let me get this straight. I really need 14 guage wire to ...
Well, I'm planning on using 1 PC supply for each 48LSD. (should have 20amps on the 5v lug of the PS). I was thinking of not using the 18ga SPT-2 wire/...
Thanks, I'll order 1800 100 ohm resistors and 600 150 ohm resitors for my strips.
dlovely wrote:For Red: 299-150-RC For Blue, Green, White: 299-100-RC I saw somewhere that the warm whites may take diffrerent resistors than the co...
I could use one (1) more BOM Jeff
budude wrote:It should be really close to 5.0 exactly. Is anything in the regulator section getting warm/hot by any chance? Are the Electrolytic caps ...
budude wrote:Can you clarify this? You go from 0->10% all is fine then 11-100% you get complete off? If that is the case, then no - that is not right....
