My neighbor came over and helped me out today, he works at a home electronics store, apparently knows a little about antennas. I found out from him...
Dave, That's the thing, if my show goes over, then no, there's not enough time. And padding it, that leaves dead space, I don't like that. I was jus...
How would I go about checking my coax for shorts? Keep in mind I did not go to school for this kind of stuff, hence all the questions, lol. Thanks a...
Just checked the voltage going into the unit, it's a steady 12.05v.
I'm pretty sure he called it Mini 8, it's definitely thicker than 1/8 of an inch, and he said it would be better than RG58 at 30', I did explain to hi...
Mactayl, My coax, like I said is Mini8, which the guy at the electronics store (the owner) told me would be the best for my application. It's 30' lon...
Well, last night I put 2 ferrite beads on my power wire, and noticed no difference. Like I said, the sound quality is very good, it just only goes a ...
Thanks, therefore I have an FM02! I am powering my FM02 with a walwart, sorry, thought I mentioned that.
Thanks LightUp, More LED's on the circuit is not an option, as it's design for one LED flood. The SSR's are already made, and in their cases, so that...
I'm sorry, yes, there was definitely dimming from the LED flood with the incandescent loads. It was a bit different, but like you said, the curve can...
Added bulbs test. First video I used a 52w bulb (energy saver incandescent) as I didn't have a 45 watt one. This video I used a 100w bulb, to see if ...
It's pretty bad when an 8' tree is considered 'mini....'
I talked to Corey a few years ago when I bought these, he's a good guy. I go to him for a lot of my Halloween stuff. I will add a lamp on the same ci...
