I have a 21 pixel one mini one here:
Here is one of my designs.
Yep I hope the project goes well!
The pipe keeps it from bumping against the window, the coupling will go on the outside of the siding with a 3D printed piece on the other back side of...
Maybe you could have the same thing from me above but make a coupling on the model so you could connect it to the frame without wind.
Over the window you could model a piece that could fit in between the cracks and have a small hole for wire to run down then, make a frame for the pix...
Here is a RGB one, if you use pixels than you could take it apart and use it as a dumb pixel port.
Also be aware of the length of wire in between each pixel. It is horrible to find out that you spent lots of money for a Coro prop only to find out th...
I have finished the project. This is for the contest above. You need to hit the UFO with the asteroids and the UFO is controlled by the other person. ...
Sorry, I needed a new antenna for my FM transmitter so the signal wouldn’t be blasting out. I couldn’t find any thing so I got a cheap $12 transmitter...
Thank you! I think I know what to do now. If you are wondering what I am using this for I am making a circuit for my little sisters entry in the fat ...
Thank you, many people have told me how to fix my problem. I thought nobody would help me for at least 1 month. Thanks!
Yes, it operates with a AA battery. I thought of using relays to switch the current when the pulley hits a limit switch. I didn’t think of a way to do...
Ok thank you! I will try out a stepper motor.
