daviddth
daviddth
@daviddth
Prominent Member
Joined: Jun 7, 2007
Topics: 30 / Replies: 895
Reply
RE: 2010 Portaflood PCB COOP

wjohn wrote:I used the same type as Davidth, cost was OK and color was good. I dont know where they were from, David has better records. I got mine...

17 years ago
Forum
Reply
RE: Renard Start Address Firmware

Just be careful of splitters like that as they are often designed to give you 2 LAN points at the remote end of a cat 5 cable. 100MB networks often on...

17 years ago
Forum
Reply
RE: Dumb things you have done

As a first year apprentice, I learnt a few interesting lessons: 1. When disconnecting a 3 phase water heater, I had turned off the supply to it, chec...

17 years ago
Forum
Reply
RE: Anyone able to test some LED strings?

Good idea Fasteddy. Extremes of temp, water, UV radiation.... Sounds like the workout the LED Ropelights are getting on my shed at the moment, and the...

17 years ago
Forum
Reply
RE: Renard64an use in 220V?

Yes the SSR's are designed to switch loads with voltages ranging from 24V AC through to 240V AC. Only 1 resistor needs changing for different voltage ...

17 years ago
Forum
Reply
RE: BerryBlap for vBulletin

While I like the idea of adding iPhone support, unless it supports the chat I'm not real worried & will use the normal page. With the chat being flash...

17 years ago
Reply
RE: Iodine deficiency

mrpackethead wrote:I use Maldon salt from england for cooking.. if you are interested. Ahhh - We have been using Maldon smoked sea salt for some of ...

17 years ago
Forum
Reply
RE: MINI down Under (Melbourne)

Haha no dramas mate, but yeah rolls of wire, lots of electonic parts, a battery or two for the cameras.... Nothing too suss there 🙂

17 years ago
Forum
Reply
RE: MINI down Under (Melbourne)

90 mins flying Vs 11hrs travelling in car. D'oh!

17 years ago
Forum
Reply
RE: MINI down Under (Melbourne)

Eddy, where are you located?

17 years ago
Forum
Reply
RE: Renard and 3 phase power

Slashdude wrote:Has anyone used Renard controllers with 3 phase power? Yes, sort of. I have 2 phases here (120 degrees apart) and provided you send ...

17 years ago
Forum
Reply
RE: Ren-C issues

Jerry, did you ever get this sorted?

17 years ago
Forum
Reply
RE: MINI down Under (Melbourne)

Brilliant Toodles - I want to meet your other half and see if he's as insane as you say 🙂

17 years ago
Forum
Reply
RE: 2010 Portaflood PCB COOP

John said he had extended the coop. The boards were ordered & should be here very soon & then posted out.

17 years ago
Forum
Reply
RE: Vixen 3.0?

Agreed. If KC ever decided not to continue Vixen development then I hope he might consider releasing the code, but until then I'm happy running whatev...

17 years ago
Page 4 / 62