Check out RJ's (diylightanimation.com) video on how he waterproofed RGBs using clear plasti-dip as a possible idea for you.
CaptKirk wrote: 😉 And if those don't quite cut it, google "Ultimate Chainsaw Video" and you will find a classic clip that should give you some i...
Heck even 40 years ago I used to refer to them as "The Out House" ...draw your own conclusions as to why (either of the common visualizations seems t...
Its not so much that I love Vixen, but in general it does what it does very well and I have become comfortable in being able to depend on it. Lots of...
CrazyG wrote:How about using a small Dust Collector blower? You could use something like this one with the dust bag removed and a 4" hose in its pl...
How about using a small Dust Collector blower? You could use something like this one with the dust bag removed and a 4" hose in its place leading t...
Or you could try Jonathan's add-in as outlined in this thread:
Hmmm, Haven't run the numbers to compensate for the 50 vs 75 ohm impedence mismatch but RG-6 probably outperforms RG-58 for very low power application...
I've had good luck with feeding a rope through the pipe, using the rope to pull the pipe into an arch and laying this out in the driveway for summer s...
dirknerkle wrote:plus we've got Lutefisk to deal with up here 😆 But all is not bad if you have some Lefse! ...As for the Lutefisk I recommend ...
David_AVD wrote:Please don't do that. The ground pin is there for a reason. :rolleyes: The correct way to get rid of the noise is to transformer cou...
If I understand correctly, the noise is absent when the laptop is running on battery. Had an HP laptop that sort of did what you describe, lifting th...
The ice pipes would probably shatter from the vibrations wouldn't you think? I think I'd fake it... Maybe clear acrylic tubes and if sound must come ...
Don't use sandpaper on soldering tips! Many soldering tips are copper plated cast iron and if you damage the copper plating, you won't be able to re-...
