This is the way it is wired now.
That was the way it was connected
Ok Jetty I have a diagram of the wiring from the arduino, Relay Board and the Wall Wart made up for you. I hope this helps I forgot to put in the di...
That's the one thing I have to learn is how to draw a schematic. If there is one drawn I can follow it, but my brain will not do it reverse, LOL.
Thank you all for the advice and help on my problem. I will disassemble everything in the morning and redo it so the Arduino is totally isolated. Cr...
here is a blow up of the Opto's
Ok, let me see if I have this correct. I should have it connected with the wall wart should be connected to the ground and the jd-vcc and the 5v from...
These are the relay boards I have, , and I will have to draw out a schematic of the lay out.
That's what I'm beginning to think as well. Tomorrow I will tear everything down and redo it all. Really want this to work.
Well spoke too soon. I am sooooooooooooooooooooooooooooooooooooooooooooo confused right now. I rewired and ensured that all connections were tight, ...
knock on wood, I think I have it figured out. I will let everyone know if I do and what I did to fix it.
I have a 5v wall wart connected to power the relays with a shared ground to the Arduino. Is this correct? I.e. gnd from Arduino to the gnd on the re...
You are being a big help by giving me ideas to chase.
I don't even have the lights plugged in only the a/c line to the relay boards. No load on the, for a lack of betters word, outputs.
