Here is a qoute from their web site. You may want to try the WS2812 protocol and see if that works. " SK6812 as new type of 5050 RGB LED Pixel,i...
Thanks jetty! I will have to print out your reply and give it a try. I did not know that about Serial.read(), it blocking unless something is there....
Well I have posted this in the Matrix area, but figured I would also post it here just in case somebody had the same idea I did. I have finally worke...
Ok folks I know it has been awhile since I started this thread, but I have made some progress. I have finally got the matrix expanded to 8 MAX719's, ...
Johnboy, you have a couple of typos in the sketch. Everywhere that you have: for(int channelIndex=0;channelIndex
Update on the Matrix. I have started a new post over in the Matrix area to keep it fitting the subject matter.
I can't thank you enough jetty for trying to help me out with this.
This is what I have so far with a rewrite of the code. It works with Generic Serial protocol. Here is the code #include "LedControl.h" LedContro...
No problem. Have fun in this wonderful hobby!!
This is what I used. // This code was written by Victor Perez for doityourselfchristmas.com based on the code from Zparticle, Si_champion and Neil T...
I know of a guy that is up in "the Great White North", Canada that is using Bare bones Uno's for his light show and has not had a bit of trouble out o...
I would actually recommend using the code done by zparticle as a starting point. it is here. I know this code works like a champ. You do have to se...
CatMan42 wrote:Z, Very sorry to hear about your health. You are the inspiration that got me into this blinky light addiction. Prayers and best wishes ...
