shadow-61356 wrote:ok new development. when i powered up the board, the power led and the ch 1 and 2 leds lit up. i went into ch test, and when i turn...
budude wrote:What is a "Sean W ssr"? Are these AC or DC SSRs? they are ac I used them with my olsen 595. I should mention that i've try 5 v and 12v ...
budude wrote:Sorry - just saw this - - can you describe the setup? Being all DC should result in fairly smooth dimming. What is the voltage/power capa...
I'm done building mine but when i try to dim the lights flicker while dimming:confused:
I gave up yesterday so for this year Im just gonna use the 595 when the season is over I'll start all over again.
N5UWP wrote:Art, Look at pin 7 on the 65LBC179 on your Ren-c board. It should be close to grnd. Pin 8 will have 5V on it. If pins 4&5 on the RS in (JP...
I'm done populating my board and I noticed that the 100 cap might be wrong it is 100v and 47uf. does that affect anything
jpb wrote:Art, what SSRs are you using? The opto's need to be "Random Cross" to allow dimming. I think this has something to do with the AC wave for...
I check all that you said, and I have no signal from the pic pin 6 to the ch pin 5. but the connections are good PC pin 3 to ren pin 4 pc pin 5 to re...
Got mine on friday, and almost done populating it except for one funny looking thing ELC-18B331L, I don't know if it has polarity or not:confused: An...
payment sent. Thanks for doing this;)
Hello nurse!!! I almost missed it. write me down for 2 PCB's and 1 Bom, I shall say 1 BOM1 pic programed Please:D
The interest so far has been for top entry jacks. The side entry cost $0.20~$0.30 more each, and without a large quantity would cost considerably more...
If this thing still going on I like to get two boards and one BOM side entry jacks.:D
