Here's some pics of my 5' star - I plan on putting 4 more segments on it, between each, to make it 8-sided. I am planning on using 8 channels of rope light, and my ropelight is in 24" sections, where I can cut it. So, the sides of the "points" are 24" (a 48" piece over-bent in half), and the five "flats" in the middle are 15 inches. I basically made 5 triangles with sides of 24" X 24" X 15", and welded them together. Then I joined all the corners of the flats, and had a one-dimensional star. I then made half-stars - two triangle sections as above, and then took a single 24" side, and a 7 1/2" flat, and welded them perpendicular to the first star. I then did it again, on the other side, giving me a 4-sided star. The last 4 segments will be done the same as the 1/2 stars, giving me an 8-sided star. Should be easy to animate, as each of the 8 "sides" will be on a separate channel. I can rotate it, or even start at the one side, and light each segment afterwards in order, or just about anything. Not sure what will look good, only through experimentation will I know. This will go on the porch, in front of the cupola...
Just thought I'd share...I'll update when I get the other segments done, and lights on it.
Roger
Nice, this will help convice the wife i need a welder.
lboucher wrote:Nice, this will help convice the wife i need a welder.
Was thinking the same thing but don't think it will fly...:-(
Maybe after I get it done?....I'm hoping it will look as good as it does in my dreams!
I gotta figure out a way, to take movies!!
My wife's pretty cool - lets me have just about whatever I want. We only have ONE thing in common......we both love ME!!!
🙂
Roger
51fordf2 wrote:
my wife's pretty cool - lets me have just about whatever i want. We only have one thing in common......we both love me!!!🙂
roger
roflmao!!!
Looks great Rodger.
I still say, I love that house.
Lou - how'd you like to donate to the upkeep?? 🙂 It's really not TOO bad, but is kind of rough. Built in 1891, and they somewhat hacked it when they brought water in, and then some more when they got rid of the wood heat, and then once again, when they "electrified" it. Had knob and tube, but that's mostly replaced, still replacing the "lead pipe"...but, paid $25,000 for it, and last appraisal (before the bust) was $190K. I've done worse...
I have the other segments in place - looks pretty good! I have to figure out a way to add a little more support, then a stand, to lift it up a foot or foot and a half. I used free steel, and it's almost too light. 1/4" would be preferable, but the price was right. Thought about making it "knock-down", but figure I'll just cut it in 1/2 after Christmas, and weld it again, next year. Easy-peasy. Maybe I'll get some lights on it by the weekend.
R
51fordf2 wrote:The last 4 segments will be done the same as the 1/2 stars, giving me an 8-sided star. Should be easy to animate, as each of the 8 "sides" will be on a separate channel. I can rotate it, or even start at the one side, and light each segment afterwards in order, or just about anything. Not sure what will look good, only through experimentation will I know. This will go on the porch, in front of the cupola...Just thought I'd share...I'll update when I get the other segments done, and lights on it.
Roger
Looks terrific Roger!
Should be called "Roger's 5 foot Octo-star" 😆
It really does look fabulous. How heavy is it going to be? After you get all those lights on it, will the frame be strong enough to be lifted and mounted? Geez, come to think of it, will you be able to lift it at all? You might need a cherry picker to put it up!!!
Without the stand, and two stings of lights, I can still lift it with one arm. Haven't even begun to come up with an idea of a stand - has to be substantial, as well as have room to be weighted down with sandbags or similar. I have several HUGE chunks of lead, from balance weights from a T-34 Mentor training airplane. Might incorporate them into it. I'll come up with something.
I figure I can haul it up with a rope, hand-over-hand from the ground. I hope....
Octo-Star...I LIKE that!
R




