This is my idea for my portable hole. I researched the concrete filled ones and concluded a round wheel would be easier for me to move during set up and take down. Also being able to break it down into smaller manageable units is an additional benefit.
The basic concept is to use old car wheel with a pipe stub welded to the rotor. The mast slips into the pipe stub. 4 Eye bolts attached to the rotor are available for anchor points.

If I don't end up welding the4 stub to the rotor exactly perpendicular, washers can be used between the the rotor and the wheel rim to compensate.
That looks like a good idea, are you going to fill the tire with concrete or will this get all its weight from the rim, rotor, and tire?
I hope not to. My thinking is the 4 Eye bolts to 8 anchor should be sufficient. BUT time will tell.
I believe the weight is secondary to anchoring and footprint.
If needs be, I can also get a bigger rim with a bigger profile tyre.
That is true the anchoring and footprint should do more than the weight of the base. Keep us posted on how this works for you.


