Is there a DLL floating around that lets Vixen 3 control LOR. I tried the one that works with Vixen 2 and have not had any success.
Control what about LOR? Do you mean to output to LOR controllers? Most people who are doing this are running their LOR controllers in dmx mode.
I haven't done this personally because I own no LOR hardware, but I thought LOR controllers auto detected DMX. You should be able to use the open DMX output controller in vixen to output DMX via your LOR dongle.
FYI: Software written for vixen 2.x cannot be used with vixen 3 as is. Some vixen 2 utilities and modules have been converted for use with V3 but many others can't be modified because they just don't fit the new concepts in V3.
FYI 2: there is an existing feature request ticket requesting an LOR output module. You can chime in on that ticket and express interest. That helps us to prioritize feature requests.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
Control what about LOR? Do you mean to output to LOR controllers? Most people who are doing this are running their LOR controllers in dmx mode.
I haven't done this personally because I own no LOR hardware, but I thought LOR controllers auto detected DMX. You should be able to use the open DMX output controller in vixen to output DMX via your LOR dongle.
FYI: Software written for vixen 2.x cannot be used with vixen 3 as is. Some vixen 2 utilities and modules have been converted for use with V3 but many others can't be modified because they just don't fit the new concepts in V3.
FYI 2: there is an existing feature request ticket requesting an LOR output module. You can chime in on that ticket and express interest. That helps us to prioritize feature requests.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
Sorry for the double post. Seems like tapatalk is behaving oddly today
--Jon Chuchla--
Sent from my iPhone using Tapatalk
This is a copy and paste of a post I put on another board. Seems to apply here. I didn't do anything special to the LOR controller, it just realized what was coming in was DMX and acted accordingly.
Joe
I tested running Vixen3 my 16 channel LOR CTB16PC today and it works beautifully. And it was so easy. I used the LOR USB to RS485 adapter but if you have one of those Enttec or Open DMX adapters it should be just as easy. I'll post some steps with screen shots below.
Setting up LOR controllers in Vixen3:
1) click on the Setup Display button in the Vixen Admin window.
2) on the left side under Element Setup pick Generic Numbered Group and click the +
3) for Group Name I used LOR01, Item Prefix I used LOR01, Item Count is the number of channels on that controller so I used 16. Press OK and you will get a LOR01 folder with LOR01-1 to LOR01-16 inside it. Later if you want to break these down you can. For instance if you know that LOR01-1 through LOR01-5 are on your gutters and 6 through 10 are bushes you could rename them to make sequencing easier. What i did I just did for testing purposes.
Repeat the above two steps for each LOR controller you have.
4) string colors can be set for the whole group or by individual. Mine are all white so highlight the top LOR01 folder, change the Configure drop down to Color Handling, and press the cog button beside it. Click the top radio button and change the default blue color to white. Click OK. I don't think there is a way to set up strings with multi color on the same string. Since this is just for the visualizer preview pick what works best for you. However if you have all blue lights on output 1 and green on 2 go ahead and set these up. Vixen will know this and when you do an alternating color effect for instance it will bounce between all your blues and greens no matter what physical output they are on.
This completes what you see in the Sequencer and you could actually stop here, set up the Preview visualizer, and complete all your sequences for the season - completing the actual mappings later even after you've physically set up your display. Note that you can nest items in this left Element Setup pane so for instance you can make one parent folder called LOR and then put three controllers under it as LOR01, LOR02, and LOR03. What this will do is show you that in the sequencer. This gives you incredible power to do a fade or wipe across the whole group just by applying an effect to the parent folder LOR so give it a little thought. This may not make sense right away but since you can move these items around later don't be too concerned with it.
5) to set up the controller outputs go over to the Controller Setup on the right side. Pick DMX Open (or Pro if you have one) and press +. Name it what you want - I called mine LOR USB-RS485. Enter the total number of outputs on all the controllers - 16 for me as i just set up one. Press OK.
6) to map the controller to your elements first highlight the top level LOR01 folder under Element Setup, then highlight the LOR USB-RS485 under Controller Setup. In the center under Patching Setup you should see 16 patch points on the left and 16 outputs selected on the right. Press Patch Elements to Controllers. A pop over will confirm your patch. If you expand each item on the left and right panes you will see the green dots confirming they are patched.
If you have more than one LOR controller you would physically chain them as you normally would in your display. The difference for Vixen setup as you can see in the instructions would be that under Element Setup you would enter another Generic Numbered Group for each controller. Then in the left pane under Controller Setup instead of 16 you would enter the total number of channels (32 for two, 48, for 3, etc). Multiple elements on the left, one controller on the right. To map click the first controller in the chain under Elements on the left and map that one first. If you expand the item on the right you will see green dots beside the first 16 only. Then map the next one in the chain and so on until you have all devices mapped. You could also highlight the expanded individual items on the left and click map (1 to 16 for example) but I think this is harder.
7) you're done. you can now try a sequence to make sure they work.
I hope this helps.



