I pretty sure all my strings are laid out correctly and addressed correctly. I have 16 strings of GECE with 44 pixels per string on a 270 degree tree with string one pixel one being bottom right. They are hooked up with the data/power line feeding from bottom of tree to top. The strings are not reversed in the E682 config (i think). Most effects are working correctly... IE fire shows from bottom to top as it should. However, I did the text option and my text is mirrored.
Any Ideas/suggestions?
duramadmax wrote:I pretty sure all my strings are laid out correctly and addressed correctly. I have 16 strings of GECE with 44 pixels per string on a 270 degree tree with string one pixel one being bottom right. They are hooked up with the data/power line feeding from bottom of tree to top. The strings are not reversed in the E682 config (i think). Most effects are working correctly... IE fire shows from bottom to top as it should. However, I did the text option and my text is mirrored.Any Ideas/suggestions?
I had same issue.. I ended up having to patch each string of elements to the corresponding section of channels and use the reverse elements checkbox..
Key here is you have to do each section of elements by itself when patching in order to undo the mirror effect.
An easier way... say you have strands of pixel elements under a parent grid object.. First select parent and apply color filter, then select all the destination outputs, then check the reverse elements check box (leave reverse output box unchecked!), and make sure radio buttons for elements and outputs are set to use unmapped channels only.
Finally, select the first strand of pixel elements, and patch them, by clicking each parent of the strand, one at a time.. You should be good.
SO unpatch all 16 strings? Each string of 44 pixels is one element, 16 elements under group "megatree". So reverse elements inverts order?
Reverse Elements takes the currently selected "Elements" and reverses the order prior to patching (works on 'groups' and 'groups of groups'). The order of the color filter is maintained (RGB stays RGB).
Yea unpatch them all, say yes to remove filters then re add color filter (can do this at top megatree element on one go).
Then patch each string element individually to its outputs using the reverse element check box...
In the end your patching would look like this for example:
S1p3 -> ch1-3
S1p2 -> ch4-6
S1p1 -> ch7-9
S2p3 -> ch10-12
S2p2 -> ch13-15
S2p1 -> ch16-18
Oh other thing I forgot to tell you is by fixing the mirroring issue it reverses red and blue channels which I think I negated (fixed) by changing the color format in the color filter properties to BGR.
MartinMueller2003 wrote:Reverse Elements takes the currently selected "Elements" and reverses the order prior to patching (works on 'groups' and 'groups of groups'). The order of the color filter is maintained (RGB stays RGB).
Supposed to.. but it screwed my color mapping up so I had to change filter. I did mapping in older build before u2 went ga the other day so maybe that bug is fixed now.
The nutcracker effects use the bottom left as pixel 1. You should patch pixel mega trees so the the bottom left maps to pixel 1.
Jeff
Sent from my iPhone using Tapatalk
jeffu231 wrote:The nutcracker effects use the bottom left as pixel 1. You should patch pixel mega trees so the the bottom left maps to pixel 1.Jeff
Sent from my iPhone using Tapatalk
Yep that's what I was conveying with the steps I put up.. Wish nutcracker would just let you pick where pixel 1 is.
Are you sure you did not use the reverse channels checkbox? That reverses post color filters by reversing the controller channels instead of the elements. There is also a bug in the unpatching code that sometimes messes up the filters when you unpatch.
