Hi,
Working on my first DIYC for next year. I've completed one sequence in Vixen and am starting on my second. I'm trying to decide on my first pixel controller and have been reading through specs. Is there a way to determine your MAX FPS for a given sequence so I can either determine which controller can do the job, or figure out where I need to simplify?
Follow up question: Assuming Vixen can tell me the max FPS, is there a way to find that portion in the sequence easily?
Thanks.
-mc
Vixen defaults to 50 ms timing or 20 fps. You can set it faster depending on how big your show is and how good your computer is. If you use FPP to play the show you can export it to that at 50ms or 25ms timing which is 20/40 FPS.
the fps is fixed oover the length of the sequence. You pick a frame rate and the player plays at that rate. full mootion video needs better than 30fps. 25ms frames gives you 40fps. you are correct in assuming not all controllers can handle that rate. you need to decide how smooth you want your show to look.
MartinMueller2003 wrote:the fps is fixed oover the length of the sequence. You pick a frame rate and the player plays at that rate. full mootion video needs better than 30fps. 25ms frames gives you 40fps. you are correct in assuming not all controllers can handle that rate. you need to decide how smooth you want your show to look.
Maybe I didn't ask the question the right way. When I watch my show in Vixen Display Preview, I see the fps count jumping around, 6 fps for slow spots, 16-21 fps for quicker pieces, etc.
When I look at controllers, for example Falcon F16v3, it lists 20 fps for 1024 pixels on an output. I realize these are maximums, but lets say I plan for 1,000 pixels on an output (realizing I have to deal with power injection, etc.), would 20 fps render my show the way I expect? Assuming the max fps in my show is actually 21 fps, I assume all is good, but back to my original question (if it makes sense): Is there a way to determine that my show's max fps is actually 21?
Thanks.
-mc
what you are asking is misleading. if you use 1000 pixels on a port driving ws281x pixels then your max frame rate is 20fps. if you limit the number of pixels to 600 then max fps is 40fps on that port. The fps in the preview is the number that the preview is running at. When I export my show to FPP it plays at a fixed rate (mine is 40fps). If my show has no transitions in a frame then the frame is a duplicate of the previous frame.
To try and answer your question, Lets say you found that your show needed 200fps to send every transition you have created. First the eye cannot see changes that fast, next no controller will go that fast and lastly the number of pixels on the ports would be limited to 100. That is a silly configuration. You set your frame rate to 40fps and that gives you full motion video. Anything faster is a waste of processing power. This all means that it does not matter what the max change rate of your sequence is. It gets limited to 40fps or less.
