Hi guys,
I messed it up. Was about to create a singing Bulb, drilling holes, cutting strings to extend the way and soldering it afterwards.
After I was done I realised, that I missed one pixel in between. Please see the picture below.
Now all pixels will be shifted and not working properly.
Instead of re-placing the pixel and cut and solder them again, is there a way to solve my issue within the software?
Many thanks
That is a classic NULL pixel configuration.
- Create a group called NullPixels.
- Put one element in the group and set it up as a pixel (can have any color, rgb etc.)
- Remove all of your patched pixels after the last one that is correctly installed.
- In other words unpatch the last 'n' pixels and leave the first 'x' pixels alone. The dividing point is the pixel that did not get installed.
Patch in the null pixel.
Patch in the rest of your pixels after the null pixel.
Remember to not apply any effects to the null pixel group.
Thank you both for the solutions. Again I learned a lot about pixels.
I’m really mad about myself and I really don’t like it pretty much as it is. The easiest way would be the ‘null pixel’ or to cover it.
If I would drill an additional hole and use the outstanding pixel, I would need to add one pixel (RGB) in vixen (setup display) at exact the position, right?
I would have one more pixel I need to patch, instead of the planned 136 I’d have 137.
Gesendet von iPhone mit Tapatalk
Your patching needs to account for every pixel in the string. Unless you cut the pixel out of the string, you need to patch 137 pixels.
FYI: Some controllers (Like the Falcon V2 and higher series) allow you to insert the NULL pixel via the controller configuration screens. This removes the need to patch at the vixen level. My Candy Canes have 99 holes and 100 pixels (one hangs off the back). Each cane has a NULL pixel assigned to it. I used to patch it via vixen (as I described) but I now add the null pixel using my F16V2 virtual string configuration.
Why not just cut it out and solder the wires together?
Aint broke. I have other more interesting things to work on. 🙂
Solved the issue now by re-designing the prop and re-patching it.
The bulb gets some kind of hairstyle now [emoji23]
By the way, that’s my first singing face ever and an ordinary one. People in Germany are really happy to see even those ones.
Standards for light shows are quite low, nothing comparing for example to the American ones 😉
Gesendet von iPhone mit Tapatalk

