Vixen 3 Export Issu...
 
Notifications
Clear all

Vixen 3 Export Issue

6 Posts
3 Users
0 Reactions
2,591 Views
Posts: 191
Topic starter
(@mlevings)
Estimable Member
Joined: 14 years ago
[#33977]

Strange Vixen 3 Export Issue

I have exported a few sequences to fpp and also to vixen 2. Everything came out fine EXCEPT for a group of channels that are out of order. My elements are as follows:
99 dmx channels (lor and renard boards)
680 pixel matrix
600 pixel tree
50 pixel arch
50 pixel arch
50 pixel star
50 pixel misc
500 roof pixels
300 pixel mid tree
25 pixel star
300 pixel mid tree
25 pixel star
Its a total of 7989 Channels.

The only issue I have is that on the roof pixels, it exports roof pixel 325 down to 1 and then 326 up to 500.
I have no idea where it is getting that order or how to change it.

Does anyone have any ideas how to fix it? I'm sure my whole house wipes will be messed up as it is now.


5 Replies
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

how do you have that roof pixel group patched? what kind of controller is it patched to? is it all patched to one controller? Is it patched in order straight thru, or do you have some sort of reversing in that scheme? Does your hardware controller have reversing enabled for that output(s)? Does the 1-325 represent a some kind of sub group? (in other words, is it a natural breaking point somehow?)


Reply
Posts: 191
Topic starter
(@mlevings)
Estimable Member
Joined: 14 years ago

They are on 2 E6804s and patched straight through with no special things going on with patching. The dividing point is where it splits on the output. I do have port one on the first e6804 reversed in the controller but vixen shouldn't know anything about it.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Re: Strange Vixen 3 Export Issue

It's hard to think this thru without really getting to know your layout and configuration.
Should vixen have known that that output is reversed? Or maybe it shouldn't be reversed on the controller?
If you play back this sequence live to your lights in V3, and then do the same from v2 or xlights, does it so the same thing?

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
ebrady
Posts: 670
(@ebrady)
Prominent Member
Joined: 17 years ago

This is a curious one, I am having a hard time wrapping my head around it also. In addition to Jon's questions about your setup, I have a couple of more.

What method are you using to determine the channels are counting down instead of up?

Are the channels reversed when you look at the channel list in Vixen 2? If you play the sequence in Vixen2 does it work correctly?
Have you tried playing the sequence directly from V3 before exporting?


Reply
Posts: 191
Topic starter
(@mlevings)
Estimable Member
Joined: 14 years ago

I just un patched the roof pixels and repatched them the same way. It exported fine this time. I'm not sure why it had an issue but it works great now. I just did a test with just shy of 9000 channels and it all looked good outside.


Reply
Share: