Vixen 3.0.10.
I have 10 Renard-DMX SS24s. The items they control are grouped so there may be 3 minitrees (RGBW - 12 channels), a light pole (W - 8 channels) and another item or spares (remaining 4 channels of the SS24) in one physical space. I'm going to call this a "pod".
I have 8 different "pods" around the yard. Each has a SS24. (The other two are on other objects that take up the whole channel count in each.)
What I want to do is define in V3 all the mini trees in group, all the light poles in another, and all the remainders in like groups.
The problem is that I cannot figure out how to patch from the items in V3 to their location in the yard (controller channel assignment). There does not seem to be a manual method to patch to specific channels on a specific controller.
Pod1-Tree1-Red to Channel 1,
Pod1-Tree1-Green to Channel 2,
Pod1-Tree1-Blue to Channel 3,
...
Pod1-Tree3-White to Channel 12,
Pod1-Pole-Segment1 to Channel 13,
Pod1-Pole-Segment2 to Channel 14,
...
Pod1-Pole-Segment8 to Channel 20,
Pod1-Extra1 to Channel 21,
Pod1-Extra2 to Channel 22,
Pod1-Spare1 to Channel 23
Pod1-Spare2 to Channel 24
Pod2-Tree1-Red to Channel 24,
Pod2-Tree1-Green to Channel 25,
etc.
This continues through all 240 channels of AC control.
Above these channel counts will be all the Pixel stuff - as you know literally thousands more channels.
I've been through hundreds of threads here and several other sites. If this has been explained anywhere, I can't find it.
Any ideas/guidance?
One of the great things about V3 are the abstraction layers.
In this case I would create low level elements that correspond to how you like to see things (perhaps organized by POD).
Then in V3 create new elements and copy/paste the low level elements to be in these out elements.
Mini-trees-red
Pod1-Tree1-Red
Pod1-Tree2-Red
Pod1-Tree3-Red
Pod2-Tree1-Red
Pod2-Tree2-Red
Pod2-Tree3-Red
etc
Then you can apply an effect to "Mini-trees-red" and all the red channels will light up...
For example you could also create other groups that have every other tree defined, then just apply effects to that group.
and on and on and...
This is really powerful....
So you are saying that I can create all my pods, complete with the different mixes of items and patch them to the controllers.
Then I can create a group called "mini-trees" and copy all the different mini trees into it, giving me the ability to turn all the mini-trees green at once.
I'm sitting next to my soon-to-be-sequencing computer and will try this.
Thanks...
Yep you got it. Elements can be nested into groups. And groups can be nested into other groups.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
Algerdes, if I understand you correctly, you aren't thinking about the strengths of V3.
AS Roterhead explained, you start by defining your elements, start by actually designing the "objects" in your show, and the "lights" that are used. Don't even worry about the actual hardware side yet, that comes later.
You can design your show, and create sequences, and play the sequences in the preview screen, without having "patched" any of the elements to the corresponding hardware controllers, universes, and channels.
In the design element side, you define each of your pods, the elements that make up the pod, and whether they are RGB, or Red, or whatever.
Then, as in Roterheads example, you copy all of the red elements from the pods to a grouping that is "red", to enable you to do special effects on the reds together, for example.
Then, once you have all your elements defined, you then do the linking (or patching, which is the V3 term) to the controllers. This could require you to do it one by one, or pod by pod, depending on how your element definition matches the real world controller side. If you have a matrix, with thousands of pixels, normally this would be just a couple of clicks to get the full matrix patched in one step.
Look here: http://www.vixenlights.com/vixen-3-documentation/basic-concepts-of-vixen-3/filters-patching/
Here is a video (for V3.0.6 and things changed as we got to V3.0.10)
Here is another video
I just realised that there is nothing about patching in the current documentation. But I am sure that I have seen a video about it. I will update this posting if I manage to find it.
Update: Here is a "Quick Start" video for V3.0.9
I think it explains what you need to do.
